** Compatibility Chart is for Thread Pitch Check Only **

** Wheel Lug Shape is Determined by Your Wheel Requirements **

** Please Use Your Existing Lug Nuts Shape As Reference **

** May NOT fit Wheel Cap **

** Only fit 7/8" Hex Required Alloy Stock Wheel **


Product Specification:

About Lug Nut

Lug Nut Thread Pitch: 9/16-18

Lug Nut Seat Type: 60 Degree Cone Seat

Lug Nut Drive: 7/8" (22mm) Hex

Lug Nut Overall Diameter: 1.19"(30mm)

Lug Nut Overall Height: 1.58"(40mm)

Lug Nut Thread Depth: 1.3"(33mm)

Lug Nut Finish: Chrome

Lug Nut Material Made: SCM Steel


Requirements of the Vehicle Specification

Required Vehicle Hub Thread: 9/16-18

Maximum Wheel Stud Length: 1.3"(33mm)

*If Your Stud is Longer Than the Maximum Allowance, You MUST Trim the Stud*


Requirements of the Wheel Specification

Required Vehicle Wheel Lug Nuts Seat Type: Cone Seat

Required Vehicle Wheel Lug Nuts Flange: 30mm

*If the Lug Hole Diameter is Smaller Than 1.19"(30mm), This Set Will NOT Fit


Requirements of the Wrench Size

Required Wrench Socket Size For Regular Nuts: 7/8" (22mm) Hex (Not Provided)


What You Will Receive:

32  pcs Lug Nuts


Compatibility Chart and Important Part Note:

Please Carefully Check for Generation information


MakeModelYear MadeGenerationOrig. StudWheel Lug Req.Special Notes
DodgeRam 25001994-2010BR/BE/DR/DH/DS/DJ9/16-1830mm Flange Cone SeatOnly Fit 7/8" Hex Required Stock Wheels
DodgeRam 35001994-2010BR/BE/DR/DH/DS/DJ9/16-1830mm Flange Cone SeatOnly Fit 7/8" Hex Required Stock Wheels
Ram25002011DS/DJ9/16-1830mm Flange Cone SeatOnly Fit 7/8" Hex Required Stock Wheels
Ram35002011DS/DJ9/16-1830mm Flange Cone SeatOnly Fit 7/8" Hex Required Stock Wheels


Return & Exchange Policy:

Your happiness with the product is our top priority. We allow returns based on the following rules:

Shipping:

Warranty:

Disclaimer: