Manufacturer's Motherboard Full Specification
| | Product Specifications| Form Factor | | | Dimensions | - 18.72" x 8.54" (47.55cm x 21.69cm)
|
| CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP**)
- Dual Socket R3 (LGA 2011)
| | Cores/Cache | | | System Bus | | | Note | **Motherboard supports this maximum TDP, Please verify your system can thermally support | | Note | † BIOS version 2.0 or above is required |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 256GB ECC RDIMM
| | Memory Type | | | DIMM Sizes | - RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
| | Memory Voltage | | | Error Detection | |
| Chipset | | | AHCI SATA | | | SCU SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10
| | SAS | Broadcom 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 5, 6, 10, 50, 60, JBOD support (IT mode)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| | Video | |
| SATA | | | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | | | Video | | | Serial Port / Header | | | DOM | | | TPM | |
SA 291036 291038 A MEM dup.co.uk | SuperServer(s) with X10DRFF-CG |
|---|
| Model(s) | SYS-F618H6-FTL+ - SYS-F618H6-FT+
- SYS-F648G2-FC0+
- SYS-F628G3-FC0+
- SYS-F628G2-FC0+
- SYS-F628R3-FC0+
- SYS-F628R2-FC0+
|
| PCI-Express | - 1 PCI-E 3.0 x32 right riser slot
- 1 PCI-E 3.0 x16 slot
- 2 PCI-E 3.0 x8 slot
- 1 PCI-E 2.0 x4 (in x8) slot
|
| BIOS Type | | | BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| Software | - IPMI 2.0
- SPM
- SUM
- SuperDoctor® 5
- Watch Dog
| | Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
| Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, 1.2V (VDIMM), VBAT, Memory Voltages.
- 6 Phase-switching voltage regulator
| | FAN | - 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temparature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors (2x fan on backplane)
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - Suspend static indicator LED
- UID/Remote UID
| | Other Features | |
| Operating Temparature Range | | | Non-Operating Temparature Range | | | Operating Relative Humidity Range | | | Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|
|
|