x4 22MM DIN1142 Wire Rope Grips Zinc Plated

 
Suits 22MM Wire Rope

Finish - Zinc Plated

Quantity - 4


Product Code
A (MM)
B (MM)
C (MM)
D (MM)
E (MM)
F (MM)
G (MM)

SFDING05
13
7.7
13
5
25
12.8
24.5

SFDING06
17
8
16
6
33
14
30

SFDING08
22
11.5
21
8
42
18
40

SFDING10
24
14		18.5
8
45
20.5
38

SFDING13
31
16.5
29
12
63
30
54

SFDING16
39
20.5
32
13.5
75
35
64

SFDING19
44
23
32
14
83
40
67

SFDING22
41
24
35
16
97
45
75

SFDING26
50
27
40
20
111
51
86

SFDING30
57
32.5
41
20
126
59
96

SFDING34
63
38.5
45.7
20.9
141
67
106

SFDING40
65
48
51
24
158
78
117



Our Wire Rope Grips, manufactured from mild steel with a zinc coating for corrosion resistance, are suitable for use on board boats in a rigging setup, or similar applications on land. The main use of these grips is to create loops of wire in a rope assembly, or when a temporary join is needed.


These are used for assemblies designed for lifting purposes. Please ensure these are installed by a qualified person.


Notes on assembly and use:


1 - Prior to fitting, the threads on the nuts and bolts should be well greased.

2 - Spacing between the grips should be at least 6 times the diameter of the rope.

3 - Ensure the grip is always orientated correctly, the 'u' bolt is placed on the unloaded end of the rope.

4 - Tighten each nut evenly and in turn to achieve the recommended torque settings.

5 - Leave unused for 24 hours and check torque setting again, re-tighten if necessary.

6 - After first application of the load, re-check torque setting, re-tighten if necessary.

7 - During service periodically check the torque setting.


FINISH COLOUR MAY VARY