• Compatibility :
  •  
  • 2009-2012 Toyota RAV4 2.5L 
  • Features:
  •  
    • Porous PTFE Filter - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.
    • Double Protection Cover - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
    • Stainless Steel Housing - Resists corrosion and contamination with a rugged, watertight body.
    • Aluminum-Oxide Trap Layer - Keeps silicone and lead outside the ceramic elient through, preventing damage to the platinum electrode.
     
  • Where is the oxygen sensor in your vehiche?
  • For 2011 Toyota RAV4 2.5L A/F Ratio O2 02 Oxygen Sensor Premium 2X Front Under

    Compatibility :

     

    2009-2012 Toyota RAV4 2.5L

     

    Features:

     

    • Porous PTFE Filter - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.
    • Double Protection Cover - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
    • Stainless Steel Housing - Resists corrosion and contamination with a rugged, watertight body.
    • Aluminum-Oxide Trap Layer - Keeps silicone and lead outside the ceramic elient through, preventing damage to the platinum electrode.

     

    Where is the oxygen sensor in your vehiche?

     

     

    Whow to install an oxygen sensor?

     

    1.Locate the oxygen sensor on your vehicle by looking for a part that looks like a spark plug that sticks out from the exhaust pipe. It will have an electrical connection attached to it.

    2.Disconnect the electrical connection on the oxygen sensor. Use a flat tip screwdriver to push in the tabs and pull the connection apart.

    3.Unscrew the oxygen sensor off the exhaust pipe using either an open-end wrench or a special socket made to remove it. The majority of oxygen sensors will take an SAE 7⁄8 inch (2.2 cm) wrench.

    4.Compare your new oxygen sensor to the old one. If the new one did not come with an electrical connection, but just with the wires stubbed out, you need to do a little work.

    · Cut off the old connector from the bad oxygen sensor, strip the wires and solder the wires to the new oxygen sensor. You can also use butt connectors.

    · Use heat sensitive shrink tape to seal the connections.

    · Follow manufacturer's instructions to know which wires to tie together.

    5.Reverse the steps used in removing the oxygen sensor and install the new part.Add a small amount of anti-seize to the threads of the new sensor. Screw it in place clockwise and snug it down with the socket or open-end wrench. Do not over tighten the sensor as you might strip the threads.

    6.Plug the electrical connections back in.

    7.Turn on the ignition key, but do not start your vehicle. Use the diagnostic scanner/reader to clear the code from the vehicle's computer.

     

    8.Start the car. You should notice an immediate improvement.

     

    NOTE:

     

    If you can't  determine whether the oxygen sensor fit your vehicle or not, please contact us.

     

     

     

     

     

     


      Item Specifics
      Manufacturer Part Number G836197SIN
      Type Oxygen Sensor, Air / Fuel Ratio
      Brand gdcarpartsin
      Manufacturer Warranty 1 Year
      Number of Pieces 2
      Fitment Type Direct Replacement
      Pin 4
      Wire 4
      Location Upstream Downstream
      Placement on Vehicle Upstream Downstream
      Sensor Type Heated
      Attachment Method Screw-On
      Universal Or Specific Fit Specific
      Housing Material Metal
      Terminal Type Blade
      Thread Size M18
      Hex size 7/8 in
      Connector Quantity 1
      Type Sensor
      Features Direct Fit

      Shipping
      1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.)
       
      2. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
       
      3. If you have not received your shipment within 15 days from payment, please contact!
      Return
      1. If you have a defected item under warranty, you can return it with 30 days after the pruchase date.
       
      2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
       
      3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
      Feedback
      1. We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
       
      2. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 
      Payment
      1. We accept multiple payment methods.
       
      2. If you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.
       
      3. Payment must be received within 10 days as auction ended or order might be delayed.
      Warranty
      1. We stand behind every product we sell.
       
      2. We define the item as defective only if it doesn't function as described.
       
      3. It is the buyer's responsibility to understand the item description before bidding.
       
      4. Man-made damage by  abuse or wrong operation is not covered by this warranty.
       
      5. No product liability insurance is assumed.

      Shop Category
      Delivery
      Help & Info
      Payment Policy
      Shipping Policy
      Return Policy
      FAQ
      About Us
      For 2011 Toyota RAV4 2.5L A/F Ratio O2 02 Oxygen Sensor Premium 2X Front Under

      Compatibility :

       

      2009-2012 Toyota RAV4 2.5L

       

      Features:

       

      • Porous PTFE Filter - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.
      • Double Protection Cover - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
      • Stainless Steel Housing - Resists corrosion and contamination with a rugged, watertight body.
      • Aluminum-Oxide Trap Layer - Keeps silicone and lead outside the ceramic elient through, preventing damage to the platinum electrode.

       

      Where is the oxygen sensor in your vehiche?

       

       

      Whow to install an oxygen sensor?

       

      1.Locate the oxygen sensor on your vehicle by looking for a part that looks like a spark plug that sticks out from the exhaust pipe. It will have an electrical connection attached to it.

      2.Disconnect the electrical connection on the oxygen sensor. Use a flat tip screwdriver to push in the tabs and pull the connection apart.

      3.Unscrew the oxygen sensor off the exhaust pipe using either an open-end wrench or a special socket made to remove it. The majority of oxygen sensors will take an SAE 7⁄8 inch (2.2 cm) wrench.

      4.Compare your new oxygen sensor to the old one. If the new one did not come with an electrical connection, but just with the wires stubbed out, you need to do a little work.

      · Cut off the old connector from the bad oxygen sensor, strip the wires and solder the wires to the new oxygen sensor. You can also use butt connectors.

      · Use heat sensitive shrink tape to seal the connections.

      · Follow manufacturer's instructions to know which wires to tie together.

      5.Reverse the steps used in removing the oxygen sensor and install the new part.Add a small amount of anti-seize to the threads of the new sensor. Screw it in place clockwise and snug it down with the socket or open-end wrench. Do not over tighten the sensor as you might strip the threads.

      6.Plug the electrical connections back in.

      7.Turn on the ignition key, but do not start your vehicle. Use the diagnostic scanner/reader to clear the code from the vehicle's computer.

       

      8.Start the car. You should notice an immediate improvement.

       

      NOTE:

       

      If you can't  determine whether the oxygen sensor fit your vehicle or not, please contact us.

       

       

       

       

       

       

        Item Specifics
        Manufacturer Part Number :G836197SIN
        Type :Oxygen Sensor, Air / Fuel Ratio
        Brand :gdcarpartsin
        Manufacturer Warranty :1 Year
        Number of Pieces :2
        Fitment Type :Direct Replacement
        Pin :4
        Wire :4
        Location :Upstream Downstream
        Placement on Vehicle :Upstream Downstream
        Sensor Type :Heated
        Attachment Method :Screw-On
        Universal Or Specific Fit :Specific
        Housing Material :Metal
        Terminal Type :Blade
        Thread Size :M18
        Hex size :7/8 in
        Connector Quantity :1
        Type :Sensor
        Features :Direct Fit


        1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.)
         
        2. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
         
        3. If you have not received your shipment within 15 days from payment, please contact!
        1. If you have a defected item under warranty, you can return it with 30 days after the pruchase date.
         
        2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
         
        3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
        1. We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
         
        2. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 
        1. We accept multiple payment methods.
         
        2. If you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.
         
        3. Payment must be received within 10 days as auction ended or order might be delayed.
        1. We stand behind every product we sell.
         
        2. We define the item as defective only if it doesn't function as described.
         
        3. It is the buyer's responsibility to understand the item description before bidding.
         
        4. Man-made damage by  abuse or wrong operation is not covered by this warranty.
         
        5. No product liability insurance is assumed.

        All rights reserved.