CISCO 7304 CHASSIS
Cisco 7300 Series routers are optimized for flexible, scalable, high-performance IP and Multiprotocol Label Switching (MPLS) services at the service provider and enterprise network edge. Providing powerful processing, a broad set of interfaces, and a compact form factor, Cisco 7300 Series routers are ideal for feature-rich, multigigabit network applications.
The Cisco 7304 Router is a midrange, price-performance optimized router with a compact (4-rack-unit [RU]), modular (4-slot) form factor (Figure 1). It delivers high-performance services in IP/MPLS networks and is optimized for the network edge, where the service provider meets the enterprise. Targeted applications include service provider edge and IP edge routing, service provider managed service customer premises equipment (CPE), and enterprise Internet gateway and enterprise WAN aggregation.
The Cisco 7304 provides numerous connectivity options, from DS0 to Gigabit Ethernet and OC-48/STM-16, in an architecture engineered for high availability and multiprotocol support. With built-in Gigabit Ethernet ports and support for Cisco 7200 Series port adapters, the Cisco 7304 is a leading-edge, flexible, feature-rich router for the network edge.
The Cisco 7304 platform offers two processor options: the NPE-G100 general-purpose processor (approximately 1 mpps) optimized for flexible feature support, and the high-performance NSE-100 (approximately 3.5 mpps) that delivers an evolving set of application-specific, hardware-accelerated IP services through Cisco Parallel Express Forwarding (PXF) technology.
The Cisco 7304 is a perfect fit at the edge, where service provider and enterprise networks meet. It provides the option of either the NPE-G100 or the NSE-100 for high-performance routing with a breadth of high-touch IP services, numerous interfaces, and robust, high-availability design.
Cisco 7304 Chassis Features
- 4-RU (7-in.) compact chassis
- 4-slot modular system
- Network Equipment Building Standards (NEBS) Level 3 compliance
- Redundant route processor (NSE-100 or NPE-G100)
- Redundant power supplies (AC or DC)
- Front-to-back airflow for optimal cooling
- Rack density
Specification
Physical
- 4-RU (7-in.) chassis 4 line-card slots per chassis
- Dimensions (H x W x D): 7 x 17.2 x 20.5 in.
- Weight: 28 lb (without power supply; power supplies 8 lb each)
Power Requirements
- AC Input Power Supply/Chassis
- AC input voltage: 100 to 240 VAC
- AC Input Current
- 8A at Vin = 100 VAC and maximum load (540W)
- 4A at Vin = 200 VAC and maximum load (540W)
- DC Input Power Supply/Chassis
- DC input voltage: -48 to -60 VDC
- DC Input Current
- 16A at Vin = -48 VDC and maximum load (540W)
- Mean time between failure (MTBF): 5.5 years for system configuration
Environmental Conditions
- Operating Condition
- Temperature: 32 to 104°F (0 to 40°C)
- Altitude: 6500ft (2000 m)
- Humidity: 10 to 85 percent noncondensing
- Storage Condition
- Temperature: -4 to 149°F (-20 to 65'C)
- Humidity: 5 to 95 percent noncondensing
Router(boot)#show version
Cisco IOS
Software, 7300 Software (C7300-BOOT-M), Version 12.2(31)SB9, RELEASE SOFTWARE
(fc2)
Copyright (c)
1986-2007 by Cisco Systems, Inc.
Compiled Tue
16-Oct-07 03:34 by pwade
ROM: System
Bootstrap, Version 12.2(22r)S, RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
Uptime for this
control processor is 0 minutes
System returned
to ROM by power-on
System image file
is "bootdisk:c7300-boot-mz.122-31.SB9.bin"
cisco 7300
(NPEG100) processor (revision B) with 983040K/65536K bytes of memory.
Processor board
ID SMQ1151NEW6
SB-1 CPU at
800Mhz, Implementation 0x401, Rev 0.2, 512KB L2 Cache
4 slot midplane,
Version 69.48
Last reset from
software reset or reload
3 Gigabit
Ethernet interfaces
1021K bytes of
non-volatile configuration memory.
125440K bytes of
ATA compact flash in bootdisk (Sector size 512 bytes).
Configuration
register is 0x2142
Router(boot)#show hardware
Cisco IOS
Software, 7300 Software (C7300-BOOT-M), Version 12.2(31)SB9, RELEASE SOFTWARE
(fc2)
Copyright (c)
1986-2007 by Cisco Systems, Inc.
Compiled Tue
16-Oct-07 03:34 by pwade
ROM: System
Bootstrap, Version 12.2(22r)S, RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
Uptime for this
control processor is 0 minutes
System returned
to ROM by power-on
System image file
is "bootdisk:c7300-boot-mz.122-31.SB9.bin"
cisco 7300
(NPEG100) processor (revision B) with 983040K/65536K bytes of memory.
Processor board
ID SMQ1151NEW6
SB-1 CPU at
800Mhz, Implementation 0x401, Rev 0.2, 512KB L2 Cache
4 slot midplane,
Version 69.48
Last reset from
software reset or reload
3 Gigabit
Ethernet interfaces
1021K bytes of
non-volatile configuration memory.
125440K bytes of
ATA compact flash in bootdisk (Sector size 512 bytes).
Configuration
register is 0x2142
FPGA information:
Hardware FPGA version
Slot Card
Type Version Bundled
Flash Current
----
--------- -------- -------
------- -------
0
NPEG100 02.02 02.05
02.05 02.05
* - Card needs an
FPGA update
# - Card needs to
be reloaded for the new FPGA to take effect