Power over HDBaseT/HDMI via Single CAT5e/6 (Tx + Rx Set) Extenders with HDR10, HDCP2.2, 4K

KD-X222/KD-X222PO HDBaseT/HDMI (Tx & Rx) Extenders are an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150 ft. using Key Digital� KD-CAT6STP1X Super CAT6A Shielded cable, or up to 125 ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250 ft. via single Key Digital� KD-CAT6STP1X Super CAT6 shielded cable, or up to 230 ft. using a single third-party CAT5e/6 cable. In addition to HDMI video and audio signals, KD-X222/X222PO carries IR or RS-232 for controlling remotely located equipment or the RS-232 port can be used to control the KD-X222/X222PO.

Features:

• HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
• KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
• Signal Extension:
• Up to 150 ft. at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
• Up to 125 ft. at 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6 UTP/STP cabling
• Up to 250 ft. at 1080p / 1920x1200 using KD-CAT6STP1X cabling
• Up to 230 ft. at 1080p / 1920x1200 using third-party CAT5e/6 cabling
• HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
• HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
• 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
• Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
• 3D: Support for standard 3D stereoscopic signal formats
• Low Profile: Super slim chassis design
• HDMI� and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
• EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
• Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
• Full Buffer System�: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
• IR Sensor: Sensor powering via +5V on Rx unit�s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
• Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
• RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
• Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
• Lossless compressed digital audio: Support for Dolby� TrueHD, Dolby� Digital Plus, Dolby Atmos�, and DTS-HD Master Audio�
• CEC Support: For inter-device control between input and output HDMI channel
• I2C Communication: EDID and HDCP authentication to Display and Source
• Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control�, AMX�, Crestron�, KNX�, RTI�, Savant, URC�, Leviton� etc.

Specifications:

• Regulation: CE, RoHS, WEEE
• Enclosure: Black Metal
• Product (Each): 4.1" x 2.8" x 0.875", Weight: 0.75 lbs
• Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector
• Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor