Product Description

Original Hedgehog Gutter Brush Leaf Guard Packs 100mm x 4m 10 Year Guarantee*

No one relishes the job of cleaning out the gutters; we all despise handling the brown slimy mulch of fallen leaves and twigs that blocks your gutters and causes so many water induced repair and maintenance jobs. The Hedgehog Gutter Brush can put an end to all those problems; it is so easy to fit; maintenance-free and lasts for years. An ingenious invention that sits within the gutter, preventing an accumulation of leaves and twigs, but allows water to flow freely through the gutters into the drains below.

The 100mm diameter, 4m long Hedgehog Brush comes in a range of three colours, black, white and brown and will fit the most common size of gutter (100 to 116mm). It automatically adapts to most shapes of gutter including square, round, classic, ogee and deepflow.

Also in our shop - Gutter clips are available for secure fitting of brushes and a specially shaped gutter scoop for easy removal of dirt and detritus before fitting.

Features:

• No more leaves or twigs etc.
• Virtually indestructible
• Available in Black, White and Brown
• Fits gutters with an internal width of 100 to 116mm
• Stainless steel wire core and polypropylene bristles
• Adapts automatically to the shape of any gutter
• Will fit most types of gutters
• Fitted in minutes - is easy to fit - does not require special installation expertise
• Maintenance free
• Lasts for years
• The bristles are coated with a unique UV resistant protective coating to safeguard and protect from extreme temperatures, allowing the provision of a solid 10 year manufacturer's guarantee (proof of purchase required)
*

Uses:

• Prevents leaves and twigs etc. from blocking gutters
• Can also be used in pathway drains

Fitting Instructions:

• Before installation ensure that any leaves/debris are removed and the gutters/drains are clean.
• It is very important that the correct diameter brush is chosen for the gutters or drains. The brush should fit fairly snugly in position with a maximum of 5mm gaps either side. If the brush is allowed to 'rattle' too much, it will be much less effective and is likely to be blown out. If you measure the inside width of the gutter and it is, say 90mm, the correct diameter of brush would be the standard 100mm diameter.
• The filaments at the top of the brush should extend slightly above the level of the tiles or slate. N.B. Although perfectly suitable for standard 100mm square or round profile gutters, the 100mm diameter Hedgehog brush will suit most gutter profiles and styles including Deepflow, Ogee and Classic profiles.
• The brushes should run continuously along the whole length of the guttering. When one brush finishes, bend the excess wiring at the end of each brush backwards to form a hook and simply attach the two brush ends together to continue the run. The brushes can run directly across the down pipe or drain outlets. If there is excess brush at the end of the run, just cut the excess off with a pair of wire snips but make sure to leave approximately 50mm overrun, then just untwist the wire to remove excess filaments, re-twist the spine tightly and bend into a hook shape and secure into the gutter.
• In cases where the gutter line tiles do not reach into the gutter properly, low hanging gutters or in windy areas, it is also recommended that the product is tied down with cable ties (400mm) or the GutterClip, normally one at 1 metre intervals should be adequate. Gutter Clips (and gutter scoops) are available from our shop. Important note: The Hedgehog Gutter Brush will withstand freezing conditions, however, it is not designed to act as a snow guard. If the brush is not held securely in place by the tile nose, there may be a chance that snow slippage may dislodge the product. If there is a risk of this occurring or if in doubt, it is recommended that the product is secured with cable ties or Gutter Clips.
• In normal circumstances, after fitting, the brushes and gutters should not require cleaning for at least 5 to 7 years and in some cases much longer. All large objects such as leaves and sticks will not be allowed to enter the gutter and therefore will blow away or perish. Smaller particles filter down into the brush and will also break down. Water will still have free passage along the gutter but the particles will be prevented from reaching the drainage system and causing blockage.
• After a short while the accumulation of dirt in the bottom of the gutter will be broken down by the action of aerobic bacteria and beneficial fungi. This biological decomposition and the passage of rainwater will become a self-cleaning process.

*Terms of the 10 Year Product Manufacturers Guarantee:

The manufacturers guarantee the manufacturing quality of the Hedgehog Gutter Brush and that the wire and filaments will continue to perform their intended function for the 10 year warranty period. The limit of their liability is for the value of the original product or replacement with new product including transport to any mainland destination. For islands and export, their guarantee is limited to the value of replacement product only. Proof of purchase must be retained and in the event of a claim, must be returned with the malfunctioned product. Please note: Only genuine Hedgehog Gutter Brushes will be covered by the manufacturers guarantee.