eBay

Product:
1. The trimmer potentiometer will not be subject to voltage fluctuations induced by the human body
2. Automatic load voltage compensation function (when the load current increases, the output will automatically compensate and increase the voltage)
3. Optimized layout of new components, fixed holes, wiring terminals, unchanged volume
4. The module height is reduced from 9.2mm to 6.8mm
5. Add 3296 precision potentiometer pads, which can be used for applications that require higher precision adjustment

Module description:
1. Negative power conversion module, which can provide negative voltage for dual-supply operational amplifiers or devices that require negative voltage
2. The module uses high-quality SMD devices
3. On-board SMD LED output indicator, the level of negative pressure is clear at a glance
4. High conversion efficiency, low heat generation
5. With short circuit protection and overload protection
6. The input voltage range is 3V to 15V, and the output voltage is continuously adjustable from -1.25 to -15V
7. The output load capacity can reach 300mA at 12V input
8. With 1 fixing hole, easy to install

The main parameters:
Working voltage: 3V to 15V
Standby current: 1mA
Output voltage: -1.25V to -15V continuously adjustable
Conversion efficiency: >83%
Output current: 300mA (the higher the input voltage, the greater the output current)
Module volume: 29.0mm*24.0mm*9.2mm
Adjustment method: miniature adjustable resistor, use clock screwdriver to adjust

Typical ripple factor (VPp):
Input 12V output-5V load 300mA = 180mVPp
Input 12V output-5V load 500mA = 245mVPp
Input 12V output -12V load 100mA = 60mVPp
Input 12V output -12V load 300mA = 160mVPp

Note: If a solid low ERS capacitor above 470uf is added to the output, VPp can be reduced to below 30mV

Product Usage:
LCD screen power supply, logic circuit power supply, DVD, EVD, operational amplifier circuit, single-chip microcomputer, communication equipment, signal processor, and other circuits or modules that require negative voltage power supply. The module can provide a maximum current of 300mA and an output current of 500mA in a short time.

Precautions:
The input polarity must not be reversed, and the input high voltage must not exceed 15V;
It is recommended to use a non-inductive screwdriver to adjust the voltage, try to rotate it slowly, and do not rotate the potentiometer too much, otherwise the output voltage will break down the chip after it exceeds the -15V limit.

Package List:
1x Negative voltage conversion module

About us
Payment
Shipping
Feedback
Return Policy
Contact Us

About us

1.A large number of products for you to choose

2.We have an independent customer service team to quickly answer your questions

Payment

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

Shipping

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

Feedback

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

Return Policy

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.

1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

integratemote