Vehicle Fitment :

2002 CADILLAC ESCALADE (Rear Wheel Drive;With Ribbed Caliper Casting)
2002 - 2006 CADILLAC ESCALADE (All Wheel Drive)
2003 - 2006 CADILLAC ESCALADE ESV
2002 - 2006 CADILLAC ESCALADE EXT
2002 - 2006 CHEVROLET AVALANCHE 1500 (4-Wheel Drive)
2003 - 2004 CHEVROLET SILVERADO 1500 (Dual Piston Caliper; 2 Wheel Steering; Brake Code JC4; Brake Code JH2;)
2005 CHEVROLET SILVERADO 1500 (4-Wheel Disc Brakes; 2 Wheel Steering;Brake Code JC4; Brake Code JH2;)
2006 CHEVROLET SILVERADO 1500 (4-Wheel Disc Brakes;Brake Code JC4; Brake Code JH2;)
2000 - 2001 CHEVROLET  SUBURBAN 1500 (Dual Piston Caliper;)
2002 CHEVROLET  SUBURBAN 1500 (Rear Wheel Drive;With Ribbed Caliper Casting)
2002 - 2005 CHEVROLET  SUBURBAN 1500 (4-Wheel Drive)
2006 CHEVROLET  SUBURBAN 1500 (4-Wheel Drive, All Wheel Drive)
2000 CHEVROLET TAHOE (4-Wheel Disc Brakes; Base, LS, LT;Dual Piston Caliper)
2001 CHEVROLET TAHOE (Dual Piston Caliper)
2002 CHEVROLET TAHOE (Rear Wheel Drive；With Ribbed Caliper Casting)
2002 - 2006 CHEVROLET TAHOE (4-Wheel Drive)
2001 GMC SIERRA 1500 (Dual Piston Caliper;Brake Code JC5)
2003 - 2004 GMC SIERRA 1500 (Dual Piston Caliper; 2 Wheel Steering;brake Code JC4; Brake Code JH2)
2005 GMC SIERRA 1500 (2 Wheel Steering; Rear Disc;Brake Code JC4; Brake Code JH2)
2006 GMC SIERRA 1500 (4-Wheel Disc Brakes;Brake Code JC4; Brake Code JH2)
2000 - 2001 GMC YUKON (Dual  Piston Caliper;(2000: 4.8L, 5.3L))
2002 GMC YUKON (Rear Wheel Drive;With Ribbed Caliper Casting)
2002 - 2006 GMC YUKON (4-Wheel Drive, All Wheel Drive)
2000 - 2001 GMC YUKON XL 1500 (Dual Piston Caliper)
2002 GMC YUKON XL 1500 (Rear Wheel Drive;With Ribbed Caliper Casting)
2002 - 2006 GMC YUKON XL 1500 (4-Wheel Drive, All Wheel Drive)

Package Include:（We'll ship the Items separately in two Or More pakages if the full set is over weight. Notice please!）

4pcs Front and Rear Brake Calipers Assembly Kit - 18-B4728;18-B4729;18-B4764;18-B4765

When to Replace Brake Calipers?

Over time in normal driving conditions, the heat generated from the braking system can weaken and break down seals inside the calipers.They can become rusty, contaminated or dirty, and start to leak brake fluid if you don’t drive regularly.

However, you should have your brakes checked immediately if you experience any of the following:

1:The brakes are continuously squeaking, squealing or grinding
2:The brake or antilock braking system (ABS) warning light comes on
3:The car jerks or pulls to one side when braking
4:You need to pump The brakes for them to work properly
5:The brake pedal feels unusually soft and spongy or hard
6:You notice brake fluid leaks around the wheels or engine compartm

How to Install Brake Calipers！

Part 1 - Remove an Old Brake Caliper:

1: Raise your vehicle with a jack and remove the wheel in front of the caliper.

2: Remove the caliper bolts and pry the caliper off with a screwdriver.

3: Pull the brake pads from the caliper bracket, then remove the bracket.
4: Disconnect the caliper from the brake hose by turning the banjo bolt.
5: Secure the new caliper to the brake hose and screw the bracket into place.
6: Slide the brake pads back onto the caliper bracket.
7: Attach and secure the new caliper to the bracket with the bolts and a ratchet.

Part 2- Install New Brake Caliper:

1：Get a new brake caliper that’s compatible with your vehicle
2：Unscrew the banjo bolt on the caliper that connects to the brake hose
3：Secure the hose onto the intake port on the new caliper.
4：Screw the caliper bracket against the brake rotor
5：Slide the brake pads onto the front and back of the caliper bracket
6：Attach the new caliper to the bracket so it fits around the brake pads

Part 3- Bleeding the Brake System:

1: Loosen the cap on the main brake cylinder under your vehicle’s hood
2: Connect a clear plastic hose between the bleeder valve and a bottle
3: Open the bleeder valve on the caliper until it starts leaking brake fluid
4: Ask a helper to pump the brake pedal until you don’t see bubbles in the hose
5: Reattach the wheel to your vehicle.
6: Take your vehicle for a test drive to make sure the brakes work properly