Motor size: 36x55 mm (1.417x2.165 inch exclude shaft)

Shaft diameter: 3.17 mm

Shaft length: 16 mm

Rated Voltage: DC 6V 12V 24V

No Load Speed: 3000-12000 RPM

Rated Speed: 2200-9000 RPM

Rated Torque: 0.3-0.4 kg.cm (3-4 N.cm)

Rated current: 0.8-1.6A

Reversible / Not Reversible: Reversible

Weight: 0.16 Kg (0.353 lb)

 

Main parameters:

Rated Voltage: DC 6V No Load Speed: 3000RPM  Rated Speed: 2200RPM Rated Torque: 0.3kg.cm Rated current: 1.5A Protection current: 2.3A

 

Rated Voltage: DC 12V No Load Speed: 3000RPM Rated Speed: 2200RPM Rated Torque: 0.3kg.cm Rated current: 0.8A Protection current: 1.3A 

Rated Voltage: DC 12V No Load Speed: 6000RPM Rated Speed: 4500RPM Rated Torque: 0.3kg.cm Rated current: 1.6A Protection current: 2.5A  

 

Rated Voltage: DC 24V No Load Speed: 6000RPM Rated Speed: 4500RPM Rated Torque: 0.3kg.cm Rated current: 0.9A Protection current: 1.5A  

Rated Voltage: DC 24V No Load Speed: 12000RPM Rated Speed: 9000RPM Rated Torque: 0.4kg.cm Rated current: 1.4A Protection current: 2.4A  

 

Tips:

1.Red - DC positive pole. Turn on this switch the motor rotate. (Wrong connection will burn the driver inside, we are not responsible for this.)

2.Black - DC negative pole.

3.White - Reverse Wire. Turn on this switch, the motor will reverse. (You must switch off the motor before reverse the motor.)

4.Bule - PWM speed controller wire, connect 0-5V PWM controller. Or add a switch(Please use the PWM speed controller of this shop, other governors may not be effective)

5.Yellow - FG hall signal output, for measure and control the position the distance.

6.Overcurrent protector inside.

7.Add a PWM(Pulse Width Modulator) speed controller to adjust the speed, some tips:

a.PWM's speed controller power should be separated from the motor, 5V DC, frequency of 10-30K.

b.Bule wire connect middle pin of the PWM's 3 pins, negative part should connect to "DC -".

c.0-10%, it does not rotate. 10%-100%, it infinitely variable speeds.

 

PWM Speed Controller

Voltage: DC 12V-24V
Speed regulation: infinitely variable
Function: forward and reverse, stepless speed regulation
Wiring: Do not reverse the positive and negative poles of the power supply, otherwise the controller will be burned.

Reliable: High quality copper wire, magnet, and components. This is a reliable motor that would not shut down compared with others’ poor quality motors.

Driver Inside: It has functions of FWD/REV, Speed Variable, Over-current Protector. Hall Encoder for measure and control speed.

Quality Bearing: Both sides have a quality bearing to make sure it durable, steady, quiet and high efficiency.

Low Noise: 50dBA at 0cm, 40 dBA at 30cm.

 

According to your choice x1

Please allow minor errors due to manual measurement. Thanks for your understanding.
Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.