Supermicro 1U CSE-815 X10SLM+-LN4F E3-1270v3 16GB Ram 4x 3.5" Bay ASR-71605 Server

Supermicro Chassis Model: CSE-815
Supermicro Motherboard P/N: X10SLM+-LN4F
Supermicro Backplane P/N: SAS815TQ

In Good Condition, Full Working Order
Tested

Includes:
  • 1 x Supermicro SuperChassis CSE-815 4-Bay Server
Specifications:
  • 1 x Intel Xeon Quad-Core E3-1270v3 3.50GHz Processor
  • 2 x 8GB DDR3 PC3-12800E Memory
  • 1 x 4-Bay 3.5" SAS Backplane SAS815TQ with 4 x SATA/SAS Hot plug Drives Caddies (No Hard Drives Included)
  • Motherboard X10SLM+-LN4F
  • 1 x 340W Power Supply PWS-341P-1H
  • 1 x Supermicro RSC-RR1U-E16 1U Riser Card
  • 1 x Adaptec ASR-71605 1GB Cache 16-Port 6Gbps Raid Controller (RAID Level: 0, 1, 1E, 5, 6, 10, 50, 60) + Battery
Manufacturer Motherboard Specification:

Physical Stats
Form Factor
  • microATX
Dimensions
  • 9.6" x 9.6" (24.38cm x 24.38cm)
 
Processor/Cache
CPU
  • Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.
  • Single Socket LGA 1150 supported, CPU TDP support 85W
 
System Memory
Memory Capacity
  • Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.35V, 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C224 Express PCH
SATA
  • SATA3 (6 Gbps) ports; RAID 0,1,5,10
  • SATA2 (3 Gbps) ports; RAID 0,1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Quad LAN with Intel® Ethernet Controller I210-ATSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputRealtek RTL8211E PHY (dedicated IPMI)
Graphics
  • Aspeed AST2400 BMC
 
Input / Output
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 6 USB 2.0 ports (2 rear + 4 headers)
  • 4 USB 3.0 ports (2 rear + 1 header + 1 Type A)
Video Output
  • 1 VGA D-Sub Connector port
Serial Port / Header
  • 2 COM Ports (1 rear, 1 header)
    1 fast UART 16550 serial
TPM
  • TPM Header
Expansion Slots
PCI-E
  • 1 PCI-E 3.0 x16
  • 1 PCI-E 2.0 x2 (in x8 slot)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • ACPI 5.0
  • USB Keyboard support
  • DMI (SMBIOS) 2.7
 
Management
Software
  • IPMI2.0, NMI, SuperDoctor® III, Watchdog
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
 
PC Health Monitoring
Voltage
  • +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, VBAT
FAN
  • 5x 4-pin fan headers (up to 5 fans), Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control
Temperature
  • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI, FC temperature sensing logic
LED
  • CPU / System Overheat LED, +5V Standby alert LED
Other Features
  • Chassis intrusion detection, Chassis intrusion header
 
Operating Environment
Operating Temperature Range
  • 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)









































VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£400 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK


CS 224729 224747 224748 a mem dup cto