Item; SuperMicro ServerBoard MBD-X7DAL-E
Condition:New  in sealed pack.  Box contains everything on list (last picture)
MBD-X7DAL-E-O
  • X7DAL-E (Standard Retail Pack)
MBD-X7DAL-E-B
  • X7DAL-E (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 10" x 12" (25.4cm x 30.5cm)
 
Processor/Cache
CPU
  • Dual 771-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same
    type below:
    • Quad-Core Intel®
      Xeon®Processor
      5400/5300 sequence
      (Harpertown
      /Clovertown processor)
      up to 3.16 GHz
    • Dual-Core Intel®
      Xeon®Processor 5200/5100/5000
      sequence (Wolfdale
      /Woodcrest/Dempsey processor)       up to 3.40 GHz
System Bus
  • 1333 / 1066 / 667 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
  • Six 240-pin DIMM sockets
  • Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
  • Dual branch memory bus
  • Memory must be populated in pairs
  • Memory Mirroring supported
Memory Type
  • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5000X (GreenCreek) chipset
  • MCH + ESB2
SATA
  • ESB2 (3Gb/s) SATA Controller
  • RAID 0, 1, 5, 10 support (Windows Only)
  • RAID 0, 1, 10 support (Linux)
Network Controllers
  • Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT support for fast, scaleable, and reliable networking
Super I/O
  • Winbond 83627HF chip
Clock Generator
  • ICS932S401EGLF
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
IDE
  • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S)
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 4x USB rear ports
  • 1x USB internal header (for 2 ports)
  • 6 total USB ports, 2.0 Compliant / 1.1 Compliant
Audio
  • AC97 Audio
  • Line-in / Line-out / Microphone Ports
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Parallel Port
  • Parallel Port Header
Chassis ( Optimized for X7DAL-E )
Tower / 4U Rackmount
Important Chassis Notes
  • To ensure system stability, a 560W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
  • 1 (x16) PCI-e slot
  • 1 (x4) PCI-et (using x16) slot
PCI-X
  • 2x 64-bit 133/100MHz PCI-X (3.3V) slots
PCI
  • 2x 32-bit 33MHz PCI (5V) slot
UIO
  • 1x UIO slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0
  • PCI-X 1.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode for AC power recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby & +5V Standby, VBAT
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of six 4-pin fans
  • 6x fans with status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis, environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
LED
  • CPU / System Overheat LED
  • Suspend-state Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
  • Class B