20L Drivemaster Acrylic Tarmac Paint & Sealer is a single-pack, water-based acrylic driveway coating formulated to restore colour, seal, and protect tired tarmacadam, asphalt, and suitably prepared porous concrete.
The breathable resin locks down loose aggregate and helps prevent fretting and raveling while forming a durable, weather-resistant barrier that repels rainwater, oil drips, and everyday dirt. Unlike solvent systems, this low-odour acrylic is easy to apply, quick to recoat, and cleans up with water to make it ideal for domestic driveways, paths, car-park bays, and forecourts.
Two factory options cover most use cases:
Normal: a smooth satin finish that refreshes colour and leaves a smart, easy-clean surface for standard residential drives.
Anti-Slip: the same advanced acrylic, pre-charged with fine silica to create a subtle, micro-textured satin that improves grip in wet conditions without feeling harsh underfoot, perfect for slopes, entrances, and high-footfall routes.
Manufactured in the UK under ISO 9001 quality controls and supplied in 5 L, 10 L, and 20 L tins, Our Acrylic Tarmac Paint & Sealer supports projects of all sizes from quick DIY driveway refreshes to trade-scale car-park refurbishments.
Applied in two thin coats, it delivers a uniform, colour-true finish with strong adhesion to asphalt and porous concrete, helping reduce dusting and day-to-day maintenance.
Tarmac/tarmacadam/asphalt (sound, clean, and dry)
Porous concrete (etch or prime with Concrete Primer if dense or power-floated)
Not suitable for polished/non-porous concrete, previously sealed surfaces that remain water-repellent, or areas with standing water. Always complete a small test patch first.
Typical spread: ≈ 6 m² per litre per coat on driveway-grade tarmac (surface profile and porosity affect coverage).
Apply two thin coats at right angles for best uniformity, colour depth, and durability.
Touch dry: 3–4 hours
Recoat: 4–6 hours
Light foot traffic: 12 hours
Vehicle traffic: 48 hours
Full cure: 7 days
Keep freshly coated areas dry for at least 6 hours after application; cool or damp conditions extend drying.
Normal: Smooth satin
Anti-Slip: Textured satin with pre-blended fine silica for discreet traction 5 L • 10 L • 20 L
Store sealed between 5–30 °C, frost-free, and out of direct sun.
Clean tools with warm, soapy water immediately after use.
Thinning: Ready to use; if spraying, thin with up to 5% clean water (excess thinning reduces film build).
For large areas, order the total requirement in one batch to ensure shade consistency across the job.
Apply outdoors or in well-ventilated areas. Avoid contact with eyes and prolonged skin exposure; wear gloves and eye protection. Keep away from children and pets until fully dry. Do not apply if rain is forecast within 24 hours. Dispose of waste according to local regulations. Refer to the Safety Data Sheet (SDS) for full guidance.Drivemaster Acrylic Tarmac Paint & Sealer is a single-pack, water-based acrylic driveway coating formulated to restore colour, seal, and protect tired tarmacadam, asphalt, and suitably prepared porous concrete.
The breathable resin locks down loose aggregate and helps prevent fretting and raveling while forming a durable, weather-resistant barrier that repels rainwater, oil drips, and everyday dirt. Unlike solvent systems, this low-odour acrylic is easy to apply, quick to recoat, and cleans up with water to make it ideal for domestic driveways, paths, car-park bays, and forecourts.
Two factory options cover most use cases:
Normal: a smooth satin finish that refreshes colour and leaves a smart, easy-clean surface for standard residential drives.
Anti-Slip: the same advanced acrylic, pre-charged with fine silica to create a subtle, micro-textured satin that improves grip in wet conditions without feeling harsh underfoot, perfect for slopes, entrances, and high-footfall routes.
Manufactured in the UK under ISO 9001 quality controls and supplied in 5 L, 10 L, and 20 L tins, Our Acrylic Tarmac Paint & Sealer supports projects of all sizes from quick DIY driveway refreshes to trade-scale car-park refurbishments.
Applied in two thin coats, it delivers a uniform, colour-true finish with strong adhesion to asphalt and porous concrete, helping reduce dusting and day-to-day maintenance.
Tarmac/tarmacadam/asphalt (sound, clean, and dry)
Porous concrete (etch or prime with Concrete Primer if dense or power-floated)
Not suitable for polished/non-porous concrete, previously sealed surfaces that remain water-repellent, or areas with standing water. Always complete a small test patch first.
Typical spread: ≈ 6 m² per litre per coat on driveway-grade tarmac (surface profile and porosity affect coverage).
Apply two thin coats at right angles for best uniformity, colour depth, and durability.
Touch dry: 3–4 hours
Recoat: 4–6 hours
Light foot traffic: 12 hours
Vehicle traffic: 48 hours
Full cure: 7 days
Keep freshly coated areas dry for at least 6 hours after application; cool or damp conditions extend drying.
Normal: Smooth satin
Anti-Slip: Textured satin with pre-blended fine silica for discreet traction 5 L • 10 L • 20 L
Store sealed between 5–30 °C, frost-free, and out of direct sun.
Clean tools with warm, soapy water immediately after use.
Thinning: Ready to use; if spraying, thin with up to 5% clean water (excess thinning reduces film build).
For large areas, order the total requirement in one batch to ensure shade consistency across the job.
Apply outdoors or in well-ventilated areas. Avoid contact with eyes and prolonged skin exposure; wear gloves and eye protection. Keep away from children and pets until fully dry. Do not apply if rain is forecast within 24 hours. Dispose of waste according to local regulations. Refer to the Safety Data Sheet (SDS) for full guidance.