Manfrotto 190XPROB professional aluminium tripod supplied with the Manfrotto 804RC2 3-way pan/tilt head and RC2 quick-release system.

A very solid, versatile Manfrotto tripod suitable for DSLR, mirrorless and other camera systems. This is the older Italian-designed 190XPROB, featuring Manfrotto's Q90 horizontal centre-column system, allowing the centre column to be moved from vertical to horizontal for low-level, macro and overhead photography without removing the column.

The 804RC2 head provides independent three-way adjustment for accurate framing, with separate controls for pan, forward/backward tilt and portrait/landscape orientation. It incorporates a counterbalance spring on the forward/backward tilt axis and uses Manfrotto's RC2 quick-release system.

Tripod specifications (190XPROB):

• Construction: black anodised aluminium
• Leg sections: 3
• Leg tube diameters: 25 / 20 / 16 mm
• Leg locks: quick-action flip locks
• Independent leg angles: 25°, 46°, 66° and 88°
• Maximum height: 146 cm
• Maximum height with centre column down: 122 cm
• Minimum height: 8.5 cm
• Folded length (tripod only): 57 cm
• Tripod weight: 1.8 kg
• Tripod rated load capacity: 5 kg
• Centre column: rapid, three-faceted column with Q90 horizontal positioning
• Head mounting thread: 3/8"-16
• Feet: rubber

804RC2 head / complete-kit specifications:

• Head: Manfrotto 804RC2
• Type: 3-way pan/tilt
• Quick release: Manfrotto RC2
• Quick-release plate: 200PL / 200PL-14
• Camera mounting screw: 1/4"-20
• 360° horizontal pan
• Built-in levelling indicators
• Counterbalance spring on forward/backward tilt axis
• Complete tripod + head weight: approximately 2.55 kg / 5.62 lb
• Complete maximum height: approximately 158 cm / 62.2 in
• Complete height with centre column down: approximately 134 cm / 52.76 in
• Complete minimum height: approximately 20.5 cm / 8.07 in
• Complete folded length: approximately 69 cm / 27.17 in
• Complete-kit rated payload: 4 kg / 8.82 lb

The lower 4 kg figure for the complete assembly is worth using on eBay: although the 190XPROB legs themselves are rated for 5 kg, the original 190XPROB/804RC2 kit was specified at 4 kg, reflecting the lower-rated component in the assembled system.

Condition:
Used and in good working condition. The legs and a couple of edges of the head show some cosmetic scuffs and scratches consistent with continuous use since new. However, all components and the tripod/head as a whole are in full physical working condition, and is as sturdy as when it was new.