CLEAR CABLE IDENTIFICATION
FOR PROFESSIONAL INSTALLATIONS
GREENCYCLE A18053 compatible heat-shrink tube combines clear black-on-white printing with a close-fitting sleeve design for identifying wires and cables in network, electrical and industrial installations.
PRODUCT OVERVIEW
A clear introduction to the A18053 compatible heat-shrink identification tube.
A18053 HEAT-SHRINK IDENTIFICATION TUBE
Designed as a compatible replacement for A18053-style industrial heat-shrink cartridges, this black-on-white tube provides a clean and organized way to identify compatible wires and cables. The cartridge contains 1.5m / 5ft of 9mm / 3/8-inch flattened heat-shrink tube and is intended for use with compatible industrial label makers.
SIZE & CABLE FIT
Confirm both the tube dimensions and cable diameter before ordering.
9MM × 1.5M STANDARD SIZE
Each cartridge contains a continuous 1.5m / 5ft length of white heat-shrink tube with a 9mm / 3/8-inch flattened width. This format is suitable for printing cable names, port numbers, equipment references and other concise identification information.
The stated 9mm measurement refers to the tube when laid flat. It does not represent the cable diameter, so both the tube size and actual cable diameter should be checked before purchase.
- Flattened tube width: 9mm / 3/8 inch
- Tube length: 1.5m / approximately 5ft
- Print color: black characters on a white tube
3:1 SHRINK RATIO & CLOSE FIT
When heated correctly, the tube contracts around the cable to create a close-fitting identification sleeve. The 3:1 shrink ratio allows the tube to accommodate a useful range of cable sizes while helping the printed identification remain positioned near the intended connection.
For a suitable finished fit, this 9mm flattened tube is recommended for cables approximately 1.73–3.73mm in diameter. Always measure the cable itself rather than relying only on the connector size.
- Recommended cable diameter: approximately 1.73–3.73mm
- Measure the cable before installing a connector or terminal
- Apply heat evenly according to your equipment instructions
PRINTER COMPATIBILITY
Made for select industrial label makers that accept A18053-style cartridges.
COMPATIBLE WITH SELECT INDUSTRIAL LABEL MAKERS
The GREENCYCLE A18053 cartridge is designed for selected DYMO Rhino, 3M and Tyco industrial label makers that support this heat-shrink tube cartridge format. Printer model names can look similar, so please compare the complete model number before ordering.
COMPLETE COMPATIBLE MODEL LIST
Please locate the exact model number on your label maker and confirm that it appears in the corresponding group below.
Contact us before purchasing and provide the complete model number shown on your printer. Our customer service team will help you check compatibility.
CLEAR & LASTING IDENTIFICATION
High-contrast output designed to keep cable information easy to locate.
CRISP, EASY-TO-READ PRINTING
Black characters stand out clearly against the white heat-shrink tube, making cable names, circuit references and equipment numbers easier to read. Consistent character edges support quick visual checks during installation, troubleshooting and scheduled maintenance.
- Suitable for letters, numbers and short equipment codes
- High black-on-white contrast supports faster identification
- Useful where multiple similar cables are installed together
PRINT THAT STAYS LEGIBLE
The printed identification is designed to resist rapid fading during normal use, helping cable information remain readable after installation. This supports ongoing maintenance where technicians may need to identify the same circuits or connections at a later date.
Actual service life can vary according to heat exposure, light, chemicals, abrasion and installation conditions.
- Supports longer-term cable and wire organization
- Helps reduce the need to repeatedly replace identification
- Suitable for regularly inspected equipment and wiring
PROTECTION & SECURE SLEEVE FIT
Designed for realistic installation environments without relying on adhesive.
WATER-RESISTANT IDENTIFICATION
The heat-shrink sleeve is designed to handle incidental moisture, splashes and routine wiping that may occur during installation or maintenance. This makes it a practical identification option for many controlled network, electrical and equipment environments.
Water resistance does not mean the product is intended for permanent underwater use or every outdoor exposure condition.
- Suitable for occasional splashes and routine surface cleaning
- Helps keep identification readable in demanding work areas
- Installation conditions should match the intended environment
SLEEVE-STYLE FIT · NO ADHESIVE
Instead of attaching to the cable with a pressure-sensitive adhesive, the tube shrinks around the cable to form a close-fitting sleeve. This helps avoid lifting corners and loose label edges commonly associated with ordinary wraparound or stick-on labels.
- No adhesive layer or exposed label edge
- Identification remains positioned around the cable
- Clean appearance for organized professional installations
THREE-STEP INSTALLATION
Prepare and position the tube before installing oversized connectors or terminals.
PRINT · SLIDE · HEAT
Create the required identification using a compatible industrial label maker. Slide the printed tube onto the cable before fitting a connector, lug or terminal that is larger than the tube opening. Position the tube where the information can be read easily, then apply heat evenly until it forms a close fit around the cable.
- Measure the cable before printing and installation
- Install the tube before attaching an oversized connector
- Use suitable heating equipment and follow its safety instructions
MATERIAL & WORKING ENVIRONMENTS
Flexible polyolefin construction for practical cable identification.
POLYOLEFIN HEAT-SHRINK MATERIAL
The flexible polyolefin tube is designed to contract around compatible cable sizes when heated correctly. It provides a smooth printable surface before installation and a close-fitting sleeve after shrinking, combining identification and cable organization in one practical format.
- Flexible before heating for easier cable positioning
- Contracts around the cable during proper heat application
- Suitable for organized electrical and data installations
MADE FOR DEMANDING WORK AREAS
The completed sleeve is suitable for many controlled network, electrical and industrial environments where labels may encounter changing temperatures, daylight, light oil contamination or routine chemical cleaning. It helps keep identification organized without exposed adhesive edges.
Performance depends on the type, concentration and duration of exposure. Confirm suitability before use in extreme or safety-critical environments.
- Useful around equipment, panels and structured cabling
- Designed for routine maintenance and identification conditions
- Not a substitute for required electrical insulation or protection
APPLICATIONS
One identification format for network, electrical and equipment wiring.
CLEAR IDENTIFICATION ACROSS EVERY CONNECTION
Use compatible A18053 heat-shrink tubes to organize network and data cabling, identify control-panel wiring and mark equipment lines near motors, sensors and terminals. Clear sleeve-style identification can help installers trace connections, reduce confusion between similar cables and support faster inspection, maintenance and replacement work. Always use the tube with cables inside the recommended diameter range.
SUPPORT BEFORE AND AFTER YOUR PURCHASE
1-YEAR WARRANTY
Your purchase is supported by a one-year warranty. If you experience a product-related problem during the warranty period, contact us with your order information for assistance.
1-BUSINESS-DAY SHIPPING
In-stock orders are prepared for dispatch within one business day, helping you receive the identification supplies needed for upcoming installation and maintenance work.
FRIENDLY CUSTOMER SERVICE
Need help checking printer compatibility or resolving an issue after delivery? Our friendly pre-sale and after-sale service team is ready to assist.
