The high static pressure makes the Pro fans ideal for use on radiators as they can effectively move the air through tight obstacles. Pressure-optimized fans are also particularly suitable for pinhole covers or mesh fabrics that generate additional resistance.
Instead of just turning the blades over, the fans are fully designed for true reverse flow. Its design ensures both high static pressure and strong airflow.
ARCTIC's reverse fans are specifically designed to draw air from the back and are particularly suitable when traditional fans would spoil the appearance.
Reduces motor noise and automatically compensates for speed drops due to increased resistance. Integrated protection mechanisms limit inrush current peaks and reliably protect against damage caused by reverse polarity.
Lower manufacturing tolerances and clearances allow the fan to operate more effectively against resistance, maximizing static pressure and airflow efficiency.
The precisely calculated balancing mass is injected precisely in one plane. This effectively reduces vibrations and ensures particularly quiet and long-lasting performance.
Thanks to the additional PWM socket, several fans can be connected in series and controlled together via just one connection.
| Fan Speed | 500-3000rpm (PWM controlled), 0rpm under 5% PWM |
| Airflow | 73 cfm | 124 m³/h |
| Static Pressure | 4.5 mmH₂O |
| Typical Voltage | 12 V DC |
| Start-Up Voltage | 4 V DC |
| Current | 0.4 A |
| Cable Length | 400mm + 80mm Daisy-Chain Cable |
| Connector | 4-Pin Fan Connector |
| Operating Ambient Temperature | 0–40 °C |
| Dimensions | 120 (L) x 120 (W) x 25 (H) mm |
| Weight | 172 g |
| Bearing Type | Hydrodynamic sleeve bearing |