ESPRESSO CUP RISER FOR SAGE BARISTA COFFEE MACHINES

Bring your espresso cup closer to the coffee spout with this compact cup riser from ForgeByLayer. The raised platform sits on the machine’s drip tray, while the slotted top allows drips to pass through to the tray below.

A practical accessory for small espresso cups and your everyday coffee setup.

WHY CHOOSE THIS RISER?

• Raised cup platform — lifts your espresso cup approximately 3.8 cm.
• Slotted drainage top — lets drips pass through to the machine’s existing tray.
• 3D printed in ASA — selected for its heat-resistant material properties.
• Compact design — approximately 9.0 cm wide × 6.3 cm deep × 3.8 cm high.
• Three colour choices — black, white or grey.

WHY ASA?

ASA generally offers higher heat resistance than standard PETG. Actual performance depends on the material grade and print settings; this is not a guarantee of a specific operating temperature.

COMPATIBILITY — PLEASE CHECK BEFORE ORDERING

Intended for the Sage Barista setup shown in the images. Please compare your machine’s drip tray and grille with the product images, including the riser’s underside positioning tabs.

Check that there is sufficient clearance for your cup beneath the fitted portafilter and that the riser does not obstruct the steam wand or any sensors.

Compatibility with every Sage machine is not guaranteed. If you are unsure, send us your machine’s model number and a clear photograph of its drip tray before ordering.

SIZE

Approximate dimensions:
Width: 9.0 cm
Depth: 6.3 cm
Height: 3.8 cm

WHAT YOU RECEIVE

1 × espresso cup riser in your selected colour.

Coffee machine, cups, portafilter and other accessories shown are not included.

FINISH AND CARE

This is a 3D printed accessory. Fine layer lines and surface texture are normal features of the manufacturing process. Colour appearance may vary slightly between screens and lighting conditions.

Clean gently by hand using a soft damp cloth. Dishwasher suitability has not been established.

INDEPENDENT ACCESSORY

This is an independently produced accessory, not a genuine Sage-manufactured part. Sage is referenced to identify the intended compatible equipment.