You may also like
ADT Factory Direct Sale. All units are 100% power-on tested before shipment.
100% New Brand Product
Brand: ADT
Model: R52JF 4.0
Product Name: M.2 A-Key to PCIe 4.0 x4 Riser Extension Cable
Cable Length: 5cm ~ 100cm, custom lengths available
Bandwidth: PCIe 4.0 x1 Gen4, up to 8Gbps
Function: Connect M.2 NVME SSD to motherboard M.2 WiFi port via this riser cable.
Purchase Notice
This item is intended for purchase by professional engineers only. Not suitable for general consumer use. General buyers please do NOT purchase. Procurement Tip: Please order 1~2 samples for verification before bulk purchase. Important Reminder: Compatibility issues may occur. Incorrect assembly or improper operation may damage your hardware. This custom product is non-returnable and non-refundable. Please confirm carefully before placing your order. Length Definition: The listed cable length refers only to the flexible cable segment, excluding PCB boards and connectors. Please refer to dimension diagram.
Product Advantages
- ADT self-developed 4th generation shielded high-speed cable with premium connectors. Stable high-frequency PCIe 4.0 x1 8Gbps signal transmission.
- Custom length available from 3cm to 100cm. Low impedance cable, full PCIe 4.0 speed stable within 60cm.
- Differential signal via-hole-free design. Eliminates signal attenuation and interference caused by parasitic capacitance and inductance, prevents CAF micro-short circuit for long service life.
- High-frequency low-loss PCB material, precision manufacturing with high TG substrate, 1oz thickened copper layer, high-content gold-plated contacts. Great conductivity, reduces system crash and audio distortion caused by oxidation and rising impedance.
- Reinforced 3mm PCB shims at soldering points, secured with screws and hex nuts. Tensile-resistant, anti-interference, prevents broken wires and pin dropouts.
- Low-profile & widened PCB design. Low profile avoids GPU interference; widened and lengthened PCB enables easier installation and lowers damage risk.
FAQ
Cable Quality & Shielding
Metal shielding layer plus advanced EMI shielding conductive polymer, flat ribbon cable construction. Every wire is fully covered by conductive polymer EMI shielding to block incoming and outgoing electromagnetic radiation, minimize interference and performance degradation while reducing cable weight.
Cable Thickness & Flexibility
Cable thickness: only 1.3mm. Flexible, can be bent and folded without affecting performance.
Important Warnings
- Check connector orientation before plugging in. Reverse or offset insertion may burn out hardware. Support the socket during insertion, do not apply excessive force to avoid pin breakage. Do NOT bend or pull the cable within 2cm from soldering joints on both ends.
- Motherboard and hardware signal drive capability varies. Our lab test results may not match your setup. Signal loss is inevitable with riser cables. Do not buy if you require absolutely perfect signal.
- Graphics cards and motherboards degrade and oxidize over time. Riser cables further reduce stability. Not compatible with hardware older than 4 years.
- For professional engineers and product testing purposes only. Not for other applications.
