Description
*Please see the photos and buy only if you are satisfied with the item.MAX HV-R41G4 High-Pressure 41mm Turbo Driver
[Product]
MAX HV-R41G4 high-pressure 41mm turbo driver.
This model is a standard tool for fastening plasterboard, designed to prioritize a high-quality finish and compatible with DTSN (JIS standard) screws.
[Genuine Accessories]
A genuine carrying case is included.
[Operation Check]
The tool was connected to an air supply and its operation was confirmed.
- No air leaks
- Screw tightening function works normally and was tested with actual use
- Continuous/single-shot driving functions normally
- Driving force switching for wood substrate/thin steel plate substrate functions normally
- Equipped with a high-voltage one-touch plug
[Condition]
This is a used item that has been heavily used on site.
- Red paint peeling, mainly around the air plug
- Scratches, board dust, dirt, and white paint splatters throughout the main unit
- Warning label on the magazine is torn or missing
- Scratches and dirt on the exterior of the case
There are various imperfections. Please refrain from purchasing if you are looking for an item in perfect condition.
Functionally, the tool works without any problems.
[Accessories]
- Main unit
- Genuine carrying case
- Oil dispenser
- Bit already attached to the main unit
- Safety glasses
- Hex wrench
- Contact Top L (transparent)
Spare bits and screws are not included.
The standard attachment is the Contact Top (orange).
[Main Specifications]
- Available screw leg lengths: 25, 28, 32, 41 mm
- Operating air pressure: 1.8–2.3 MPa (high-pressure use only)
- Number of screws included: 100 (1 roll)
- Weight: 1.9 kg
- Dimensions: 312 × 116 × 300 mm
If you have any concerns about the product, please contact us directly.
MAX HV-R41G4 High-Pressure 41mm Turbo Driver
[Product]
MAX HV-R41G4 high-pressure 41mm turbo driver.
This model is a standard tool for fastening plasterboard, designed to prioritize a high-quality finish and compatible with DTSN (JIS standard) screws.
[Genuine Accessories]
A genuine carrying case is included.
[Operation Check]
The tool was connected to an air supply and its operation was confirmed.
- No air leaks
- Screw tightening function works normally and was tested with actual use
- Continuous/single-shot driving functions normally
- Driving force switching for wood substrate/thin steel plate substrate functions normally
- Equipped with a high-voltage one-touch plug
[Condition]
This is a used item that has been heavily used on site.
- Red paint peeling, mainly around the air plug
- Scratches, board dust, dirt, and white paint splatters throughout the main unit
- Warning label on the magazine is torn or missing
- Scratches and dirt on the exterior of the case
There are various imperfections. Please refrain from purchasing if you are looking for an item in perfect condition.
Functionally, the tool works without any problems.
[Accessories]
- Main unit
- Genuine carrying case
- Oil dispenser
- Bit already attached to the main unit
- Safety glasses
- Hex wrench
- Contact Top L (transparent)
Spare bits and screws are not included.
The standard attachment is the Contact Top (orange).
[Main Specifications]
- Available screw leg lengths: 25, 28, 32, 41 mm
- Operating air pressure: 1.8–2.3 MPa (high-pressure use only)
- Number of screws included: 100 (1 roll)
- Weight: 1.9 kg
- Dimensions: 312 × 116 × 300 mm