| Description |
Remark: The valley pan gasket in this does NOT fit on engines with Active Fuel Management (A.F.M.) system. These engines have two different designs for the head bolts. 1st design head bolts have 16 Long Bolts: 150mm, 4 Short Bolts: 100mm, 10 Small Bolts: 45mm. 2nd design head bolts have 20 Long Bolts: 100mm, 10 Small Bolts: 45mm. This kit ONLY FITS engine with 2ND DESIGN HEAD BOLTS (20 long bolts: 100mm, 10 small bolts: 46mm). Please double check your engine head bolts to make sure this kit will fit your engine before making the purchase.
Fits following vehicles:
Fit for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines
For 1999-2002 Camaro and Firebird
For 2010-2013 Camaro
For 1999-2013 Corvette
For 2004-2006 Pontiac GTO
For 2004-2007 Cadillac CTS-V
For 2008-2009 Pontiac G8
For 2000-2013 Tahoe, Yukon, Escalade
For 2003-2009 H2 Hummer
For 1999-2013 Silverado and Sierra (4.8L, 5.3L, 6.0L)
Camshaft Type: Hydraulic Roller
RPM Range: 2200 to 5400 RPM
Intake Valve Lift: .585"
Exhaust Valve Lift: .585"
Advertised Intake Duration: 283°
Advertised Exhaust Duration: 286°
Intake Duration @ .050": 228°
Exhaust Duration @ .050": 230°
Lobe Separation: 112°
Intake Centerline: 108°
Cam Gear Attachment: 3-Bolt
NOTE: This is a 3-bolt cam (Gen III LS), if you have a single bolt cam (Gen IV LS) you will need to purchase 3-bolt cam gear conversion kit.Not compatible with Active Fuel Management (AFM). Custom computer tuning required.Automatic's will perform best with a 2,600-2,800 Stall Converter.These are .560" Lift Beehive Valve Springs!!!
.560"Springs Set:
100 lbs @ 1.800"
285 lbs @ 1.240"
Coil Bind @ 1.150”
560" Max Lift
Beehive design
Works with stock retainers & locks
Valve Lifter Set: 16pcs HL-124 Valve Lifters
For Chevy LS Pushrods 7.400" 5/16"
Set Quantity:16PCS
Engine:4.8, 5.3, 6.0, LQ4,LQ9
Diameter:5/16"
Material:4130 Structural Steel
Overall Length:7.400"
Notes: Not for use with AFM/DOD
Package Included:
Cam Camshaft For Chevy x1
Bee Hive Valve Springs x16
valve seals x16
Pushrods x16
Guides x4
Lifters x16
Bolts x4
Filter x1
Multiple Layers Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket Metal Upgraded)
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
30 Cylinder Head Bolts (20 Long Bolts: 100mm, 10 Small Bolts: 45mm)
Fit for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines
For 1999-2002 Camaro and Firebird
For 2010-2013 Camaro
For 1999-2013 Corvette
For 2004-2006 Pontiac GTO
For 2004-2007 Cadillac CTS-V
For 2008-2009 Pontiac G8
For 2000-2013 Tahoe, Yukon, Escalade
For 2003-2009 H2 Hummer
For 1999-2013 Silverado and Sierra (4.8L, 5.3L, 6.0L)
Camshaft Type: Hydraulic Roller
RPM Range: 2200 to 5400 RPM
Intake Valve Lift: .585"
Exhaust Valve Lift: .585"
Advertised Intake Duration: 283°
Advertised Exhaust Duration: 286°
Intake Duration @ .050": 228°
Exhaust Duration @ .050": 230°
Lobe Separation: 112°
Intake Centerline: 108°
Cam Gear Attachment: 3-Bolt
NOTE: This is a 3-bolt cam (Gen III LS), if you have a single bolt cam (Gen IV LS) you will need to purchase 3-bolt cam gear conversion kit.Not compatible with Active Fuel Management (AFM). Custom computer tuning required.Automatic's will perform best with a 2,600-2,800 Stall Converter.These are .560" Lift Beehive Valve Springs!!!
.560"Springs Set:
100 lbs @ 1.800"
285 lbs @ 1.240"
Coil Bind @ 1.150”
560" Max Lift
Beehive design
Works with stock retainers & locks
Valve Lifter Set: 16pcs HL-124 Valve Lifters
For Chevy LS Pushrods 7.400" 5/16"
Set Quantity:16PCS
Engine:4.8, 5.3, 6.0, LQ4,LQ9
Diameter:5/16"
Material:4130 Structural Steel
Overall Length:7.400"
Notes: Not for use with AFM/DOD
Package Included:
Cam Camshaft For Chevy x1
Bee Hive Valve Springs x16
valve seals x16
Pushrods x16
Guides x4
Lifters x16
Bolts x4
Filter x1
Multiple Layers Steel (MLS) Head Gasket
Valve Cover Gasket
Valve Stem Seals
Intake Manifold Gasket Metal Upgraded)
Exhaust Manifold Gasket
Front Camshaft Seal
O-rings
Other Small Gaskets
30 Cylinder Head Bolts (20 Long Bolts: 100mm, 10 Small Bolts: 45mm)
| Contact Information |
Thank you again for visiting our store. For order questions and technical support please contact us via the Ebay Message System/Contact Seller. and we are more than happy to answer any questions you may have. Please understand that we are not in the office on Saturday and Sunday, and questions asked over the weekend will be answered on the following Monday.