RP2350-LCD-0.96 Development Board with 0.96inch LCD Display 160x809011
RP2350-LCD-0.96 is a low-cost, high-performance -like MCU board with flexible digital interfaces. It incorporates for 's RP2350A microcontroller chip, the same as on for 2.
Adopts dual-core and dual-architecture design: dual-core -M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz.
520KB of , and 4MB of on-board Flash memory.
USB-C connector, keeps it up to date, easier to use.
0.96inch 160x80 pixels 65K colorful IPS LCD display.
Lithium battery recharge/discharge header, suitable for mobile devices.
Onboard DC-DC chip MP28164, high efficiency DC-DC -boost chip, maximum 2A load current.
Castellated module allows soldering directly to carrier boards.
USB 1.1 with device and host support.
Low-power sleep and dormant modes.
Drag-and-drop programming using mass storage over USB.
26 x multi-function GPIO pins.
2 x SPI, 2 x , 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels.
Accurate clock and timer on-chip.
Temperature sensor.
Accelerated floating-point libraries on-chip.
12 x Programmable I/O (PIO) state machines for custom peripheral support.
Note:Due to different production batches, there are differences in printing/appearance, which does not affect the use.
Type:Soldered
Colour:Blue
Material:PCB
Package Contents:
1 * Development Board
Adopts dual-core and dual-architecture design: dual-core -M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz.
520KB of , and 4MB of on-board Flash memory.
USB-C connector, keeps it up to date, easier to use.
0.96inch 160x80 pixels 65K colorful IPS LCD display.
Lithium battery recharge/discharge header, suitable for mobile devices.
Onboard DC-DC chip MP28164, high efficiency DC-DC -boost chip, maximum 2A load current.
Castellated module allows soldering directly to carrier boards.
USB 1.1 with device and host support.
Low-power sleep and dormant modes.
Drag-and-drop programming using mass storage over USB.
26 x multi-function GPIO pins.
2 x SPI, 2 x , 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels.
Accurate clock and timer on-chip.
Temperature sensor.
Accelerated floating-point libraries on-chip.
12 x Programmable I/O (PIO) state machines for custom peripheral support.
Note:Due to different production batches, there are differences in printing/appearance, which does not affect the use.
Type:Soldered
Colour:Blue
Material:PCB
Package Contents:
1 * Development Board
