Alang Bearing Stores

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

Key Dimensions

Cone Part Number

3198

Bore (d)

1 1/8 in28.575 mm

Inner Ring Width (B)

1.1810 in29.997 mm
Dynamic Radial Load Rating - 1M Revs (C1) 121300 lbf94800 N
Dynamic Radial Load Rating - 90M Revs (C90) 25520 lbf24600 N
K Factor 31.76

Other Dimensions

Weight

1 lb0.5 Kg
Effective Center Location4-0.4 in-10.2 mm
Max Shaft Fillet Radius50.050 in1.300 mm

Shaft Backing Shoulder Diameter - Frontface (da)

1.46 in37 mm

Shaft Backing Shoulder Diameter - Backface (db)

1.54 in39 mm

Cage Location rel. to BF (Aa)

0.03 in0.8 mm

Cage Location rel. to FF (Ab)

0.06 in1.5 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)63140 lbf14000 N

Static Radial Load Rating (CO)

22800 lbf102000 N

Factors

G1 Factor

23.4

G2 Factor

8.76
Geometry Factor (Cg)70.0697
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.