Product Description

Vehicle-specific high-level brake light rear view reversing camera with 7-inch monitor kit, designed for compatible Mercedes-Benz Sprinter and Volkswagen Crafter 2006–2015 vehicles.

The reversing camera is integrated into a replacement high-level third brake light housing, allowing it to replace the compatible original brake light using the existing mounting position. This provides a discreet installation without needing to drill separate mounting holes for the camera.

The camera provides a PAL rear-view image, night vision capability and a wide viewing angle. When correctly wired to the reverse circuit, the camera and monitor can automatically display the rear-view image when reverse gear is selected.

The supplied 7-inch 800 × 480 monitor features dual video inputs and supports both PAL and NTSC signals, making the complete system suitable for parking, reversing and improving rear visibility.

Key Features

• Vehicle-Specific Brake Light Camera – Designed for compatible Mercedes-Benz Sprinter and VW Crafter models.
• High-Level Third Brake Light Replacement – Fits in place of the compatible original rear brake light.
• Integrated Reversing Camera – Discreet camera built directly into the replacement brake light housing.
• Night Vision Camera – Designed to improve visibility during low-light reversing.
• Wide Angle Lens – Camera viewing angle specified at 92°–170°.
• 420–480 TVL Resolution – Provides analogue rear-view video for compatible displays.
• IP67–IP68 Rated Camera – Designed for exterior vehicle installation.
• Automatic Reverse Display – When correctly connected, the rear image can automatically appear when reverse gear is engaged.
• Mirror-Style Rear Image – Displays a reversed image similar to the view from a conventional rear-view mirror.
• 7" Colour Monitor – Large 16:9 display with 800 × 480 resolution.
• Dual Video Inputs – V1 and V2 inputs allow connection of two compatible video sources.
• PAL / NTSC Monitor Support – Monitor accepts both common analogue video standards.
• Image Flip Function – Monitor image can be adjusted up/down and left/right.
• Low Power Consumption – Camera current consumption is no more than 150mA.

Vehicle Compatibility

Designed for compatible:

• Mercedes-Benz Sprinter: 2006–2015
• Volkswagen Crafter: 2006–2015

Please compare the dimensions and mounting arrangement of your original high-level brake light before ordering.

Camera Specifications

• Camera Type: High-Level Brake Light Rear View Camera
• TV System: PAL
• Image Sensor: CMOS
• Effective Pixels: 682 × 504 / 728 × 576
• Resolution: 420–480 TV Lines
• Horizontal Sync Frequency: 15.625kHz
• Vertical Sync Frequency: 50Hz
• Scanning System: 2:1 Interlace
• Sync System: Internal
• White Balance: Auto
• Signal-to-Noise Ratio: >48dB
• Minimum Illumination: 0.5 Lux
• Current Consumption: ≤150mA
• Operating Voltage: DC 12V
• Lens Angle: 92°–170° Wide Angle
• Waterproof Rating: IP67–IP68
• Operating Temperature: -20°C to +70°C, RH95% Max
• Storage Temperature: -30°C to +80°C, RH95% Max
• Output Wiring: Power Supply / Video Signal / Ground
• Approx. Distance Between Screw Holes: 31cm
• Approx. Brake Light Width: 3.2cm
• Approx. Vehicle Opening: 29cm × 1.5cm
• Video Connection: Composite RCA
• Supplied RCA Video Cable Length: 5m

Monitor Specifications

• Screen Size: 7"
• Monitor Size: Approx. 25 × 10.8cm
• Aspect Ratio: 16:9
• Resolution: 800 × 480
• Contrast Ratio: 350:1
• Video Inputs: 2
• Input Signal: AV
• Video Standard: PAL / NTSC
• Operating Voltage: DC 12V
• Power Consumption: 6W
• Operating Temperature: -20°C to +70°C
• Reverse Trigger Display: Supported
• Image Adjustment: Up / Down / Left / Right Flip
• Bluetooth: 2.0 as stated in the supplied specifications

Dual Video Input Function

The monitor features V1 and V2 video inputs.

Under normal operation, V1 is used as the default video input. When the reverse trigger is correctly connected and reverse gear is selected, the monitor automatically switches to the V2 rear camera input.

When the vehicle is not reversing, the video source can also be changed using the V1/V2 button on the monitor or the video-select function on the remote control.

Installation / Use

1. Remove the compatible original high-level brake light from the rear of the vehicle.
2. Compare the mounting position and dimensions with the replacement camera assembly.
3. Install the brake light camera using the vehicle's existing mounting points.
4. Route the supplied RCA video cable safely from the rear camera to the monitor.
5. Connect the camera to the appropriate DC 12V power supply and reverse trigger as required.
6. Connect the camera video output to the monitor's V2 video input.
7. Connect the monitor to its DC 12V power supply.
8. Select reverse gear and confirm that the rear camera image appears correctly.
9. Check the viewing angle and all connections before completing installation.

Package Includes

• 1 × High-Level Brake Light Rear View Camera
• 1 × 7" Monitor
• 3 × Cables

Important Notes

• This camera is designed for compatible Mercedes-Benz Sprinter and Volkswagen Crafter 2006–2015 applications. Please compare your original brake light dimensions and mounting arrangement before ordering.
• The camera operates on DC 12V.
• The camera provides a PAL composite RCA video signal.
• The camera is intended for aftermarket monitors or head units with a compatible RCA video input.
• It is not designed for direct connection to original factory-fitted OEM displays that do not provide the required RCA camera input.
• Optional features mentioned in the original specifications are not guaranteed to be included unless specifically supplied with the purchased version.
• Installation instructions are not included.
• Professional installation is highly recommended.
• Please allow approximately 1–3cm variation due to manual measurement.
• Actual product colour may vary slightly from listing images due to lighting and monitor settings.