This is a three-axis guided cylinder from the AFR brand, a type of pneumatic actuator commonly used in the field of industrial automation. This series of cylinders features a three-axis structure (main cylinder + guide rods on both sides) and incorporates four ball-bearing guide rails, enabling smooth horizontal pushing and pulling without jamming. It is suitable for high-precision, high-load linear motion applications.
As shown in the figure, this series of cylinders offers a variety of stroke specifications, including 32X50S, 32X100S, 32X150S, 32X200S, 32X250S, 32X300S, 32X400S, 32X500S, 32X600S, 32X700S, 32-800S, among others. The numbers represent the cylinder bore diameter of 32 mm and the stroke length (in mm); for example, “32X50S” denotes a 32-mm bore diameter and a 50-mm stroke. All models come standard with a magnetic ring and are compatible with CMSE/DMSE series magnetic switches, facilitating position detection and automated control.
Their core specifications are uniformly listed as follows: a theoretical thrust of 28 kg at 0.5 MPa air pressure, an M6×1.0 threaded mounting hole, and a PT1/8 air port. The overall structure is compact, making it suitable for embedded installation. The figure also specifically notes, “Manual measurements may contain slight errors; please refer to the actual product,” reflecting the rigor expected of industrial products.
This cylinder is widely used in applications such as automated assembly lines, material handling, precision positioning, and press-fitting equipment. Its three-axis guidance design effectively resists lateral forces, enhancing motion stability and service life, making it a highly reliable alternative to traditional single-axis cylinders.
