This ion fan is designed to help neutralize static charge with ionized airflow. It provides directional airflow, wide wind adjustment, and grounding protection for use in targeted work areas. ✨
The ion fan can generate a large number of positive and negative airflow, helping neutralize charge on the object surface. It is designed for fast, targeted neutralization of static charge in a directional work area.
This setup helps reduce the time needed for normal maintenance and supports ionization performance for the target work area. When a surface carries negative charge, it absorbs positive ions in the airflow. When a surface carries positive charge, it absorbs negative ions in the airflow, helping remove static electricity.
Suitable for local static removal where airflow can reach. For large equipment, the original listing recommends an ion wind rod or long ion fan.
| Operating Voltage | 110V/60Hz |
| Current Consumption | 0.25A |
| Air Output | 45~110CFM |
| Operating Temperature | 0~50°C |
| Noise | Minimum 49dB / Maximum 59dB |
| Dimensions | 170 (L) × 90 (W) × 260 (H) mm |
| Weight | 3kg |
| Residual Voltage | 0V±10V |
| Air Flow Area | 40cm × 60cm |
| Ion Balance | ≤ ± 10V |
| Heating Power | 250W |
| Test Voltage | 1KV-100V |
| Ambient Temperature | 22 °C |
| Humidity | ≤ 60% |
| Neutralization Time | 300mm: positive 1.2s / negative 1.2s 600mm: positive 2.5s / negative 2.4s 900mm: positive 4.0s / negative 3.9s |
| Residual Voltage | 300mm positive and negative ≤±15V |
Please review the listed specifications before purchase. If this ion fan matches your setup, it can be a practical choice for static control in targeted work areas. 🙂


| shipping notice | Can not ship to Puerto Rico,Alaska/Hawaii |
|---|---|
| Brand | Unbranded |
| MPN | Does Not Apply |
| Voltage | AC 110V |
| Frequency | 60Hz |
| Air output | 45~110CFM |
| Operating temperature | 0~50°C |
| Noise | minimum 49dB maximum 59dB |
| Dimensions | 170 (L) × 90 (W) × 260 (H) mm |
| Air flow area | 40cm × 60cm |
| UPC | Does not apply |

