Selling off some of my own FPV gear. ReadyMadeRC 8 inch Monitor - No blue screen
Did originally come with a sun shade, can't find it so having to sell without.

8" Ground Station HD Monitor Features
1. The FPV819A ground stand HD monitor, designed specially for outdoor users, does not have "blue screen", is your best choice FPV or aerial photography.
2. High resolution 800×480, contrast ratio 500:1 and brightness of 450cd/㎡ providing a much improved video screen image.
3. Multi color format support, enter the menu manually to select the same format as your camera.
4. Analog composite video AV input, connect the aerial camera. 16:9 aspect ratio, switch the display mode between 16:9 and 4:3.
5. Connect with the camera, as a monitor or secondary monitor of aerial imagery.
6. High brightness, contrast ratio and dizzy-proof monitor with sun shade, to see clearly under bright sunlight.
7. 1/4-20 thread hole is included in the bottom, allowing easy mounting on the tripod.

8" monitor panel instruction

1. ：Volume down or to adjust the value of setting function

2. ： Volume up or to adjust the value of setting function

3. ： To activate or close OSD menu

4. ： OSD selection button

5. ：OSD item select button or No menu state press it to cycle

adjust the 5 level brightness

6. Infrared receiving window, NO use for this monitor

7. MODE: Signal selection, NO use for this monitor

8. ：POWER ON/OFF button, for the monitor working or standby

selection

9. POWER Power DC12V input voltage port, core and external

10. Red RCA, audio input port

11.Yellow RCA, video input port

8" monitor input port instruction

1. Black DC power 12V input port,(core﹢and external -)

Supply voltage range of the monitor can be adapted for DC 6 to 18V. User

configuration should be in this voltage range, and no less than 1A

qualified power supply current.

2. Red RCA audio signal input port

3. Yellow RCA video signal input port

4. 1/4 inch bracket screw holes, can be easily connected to the hot

shoe mount, tripod fixed installation.

2. Operation instruction 

● Panel button operation instruction

Before the feature setting, Please carefully check the equipment is

connected correctly. Access to the corresponding signals and power.

Monitor in standby mode (red power indicator light).

“ ”Power on button. After powered, press this button to boot (green

power indicator light), if in the working state, repress “ ”button, monitor

recover standby state.

“ ” adjust brightness shortcuts button. In the working state, if not enter

the menu operation, press “ ”button to achieve brightness 5 level

changes

“ ” Volume down button

“ ” Volume up button

“ ”OSD button. Press“ ”button on the monitor, enter into OSD

operation. Press “ ”or“ ” button to select the needed options:

（ color） （adjust） （OSD） （function） （sound）. After select

the option, press “ ”or“ ”button on the unit or remote controller to

confirm, then use “ ”or“ ”button to select the options. Repress

“MENU” button to exit the OSD menu.

Panel size 8.0 inch

Panel type TFT LCD

Resolution  800×3（RGB）×480

Backlight LED 

Horizontal frequency range 30 ～60 kHz 

Field frequency range 50 ～75 Hz 

Dot pitch 0.0736（W）×0.2072（H）mm

Display ratio 16:9

Brightness 450 cd/㎡

Contrast ratio 500 :1

Response time 15 ms 

Viewing angle 70°/70°(L/R) 50°/70°（U/D)

Input voltage DC 6 ～18V

Power consumption ≦ 7W

Working temperature -20℃～60℃

Storage temperature -30℃～70℃

Unit size 209（L）×147（W）× 35（H）mm

Unit weight 511 g