When space is at a premium, these and durable aluminum service mini ramps make it easier than ever to raise your vehicle 10" for service. An 11.5 deg. approach provides clearance for low-profile trucks or cars with ground effects. These service ramps feature raised and beveled side rails to keep your tires on the ramps, a tire stop on the top to prevent rolling off, lightweight and durable aluminum construction that will never rust, and a wide 14" surface. The bottom of the stands include rubber pads to prevent movement of the ramp when loading or unloading.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.