Welcome  Product Description Features: 【Faster Cooling】Enlarge impeller vanes allow more coolant to pass through the water pump at the same engine speed. Lower the temperature of the coolant by 10-15 degrees than standard, optimizing the overall performance of your bike. 【Extended Space】The aluminum spacer Increases the overall volume of coolant passing through the water pump and improves heat exchange. 【Lightweight Aluminum】Made from premium 6061-T6 aluminum that provides superior hardness at the lowest possible weight. 【Race Look】Processed by cutting-edge anodic oxidation to maintain its original appearance over time and enhance the bike's character. 【CNC Technology】Boasts the latest CNC technology, the accuracy of each cutting part can be ensured for easy installation. Specifications: Brand: NICECNC Condition: 100% Brand new Material: Billet Aluminum Processing: CNC-machined Surface: Anodization Package Included: 1 x Oversized Water Pump Impeller Cooler Kit Fitment: For KTM 450 SX-F/XC-F 2016-2024 For KTM 450 500 EXC-F/XCF-W 2017-2024 For KTM 450 SMR 2021-2024 For KTM 450 RALLY FACTORY 2019-2022 For KTM 500 XW-F 2024 For Husqvarna 450 FC/FS 2016-2024 For Husqvarna 450 500 FE/FE S/FX 2017-2024 For Husqvarna FR 450 RALLY 2019-2024 For Husqvarna FE 501w 2024 For Gas Gas 450 MC F/ EX F/EC F 2021-2024 For Gas Gas RX 450F REPLICA 2023-2024 For Gas Gas 500 EW F/ES/EC F 2024 Installation Instructions ✅ 1. Clean the Contact Surfaces Before installing the gasket, thoroughly clean the water pump contact surface and the engine housing to ensure: • No oil, dust, or old sealant residue remains. • Use a clean cloth or scraper to remove any debris, and wipe the surface with a degreaser to ensure it is dry and residue-free. 🔹 Purpose: To prevent poor sealing and ensure proper adhesion of the sealant. ✅ 2. Evenly Apply PTV Engine Sealant • Evenly apply a thin, uniform layer of PTV engine sealant to both sides of the gasket. • Avoid applying excessive sealant, as this may: • Cause poor sealing • Lead to sealant overflow, making future disassembly difficult 🔹 Note: Use specification-compliant PTV sealant to ensure high-temperature resistance, leak prevention, and long-lasting sealing performance. ✅ 3. Proper Installation and Tightening • Accurately align the gasket with sealant applied between the water pump and the engine. • Tighten the bolts according to the manufacturer's recommended torque specifications to ensure even compression. ⚠️ Caution: • Avoid over-tightening, as it may: • Damage the gasket • Deform the contact surface, compromising the seal ✅ 4. Curing Time • After installation, allow the sealant to cure undisturbed. • Refer to the sealant’s instructions for curing time to ensure optimal sealing performance before starting the engine. 🔹 Tip: Avoid moving or disassembling the parts during the curing process. ✅ 5. Safety Tips • Wear protective gloves during installation to prevent sealant from contacting the skin. • Work in a well-ventilated area to avoid inhaling volatile gases. • When cleaning excess sealant, use a dedicated cleaner or alcohol to keep the contact surface clean. DISCLAIMER Disclaimer: Brother2boy parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco etc. Payment Policy
 Visit Our Store For Best Deal! |