Features:
- 100% brand new and high quality;
- Each side contains a travel limit switch. When the telescopic pole moves up or down, the power supply is automatically cut off,the engine does not idle. Turn off the power supply, it can be stopped at any position with self-locking function;
- Driven by a DC motor with a screw drive. The telescopic rod can only be retracted without turning;
- The engine has positive and negative. For example, when the positive electrode is stretched and the negative electrode is shrunk, the telescopic direction of the rod can be changed by changing it;
- Ambient temperature -10 ° C to + 50 ° C;
- Standard protection class: IP54;
- Low noise design, noise level below 50dB.
Specifications:
- Input voltage: DC 12V;
-
Current: 0.04A~0.2A;
- Stroke Length: 0.4"/10mm,0.83"/21mm,1.18"/30mm, 2"/50mm, 3"/75mm, 4"/100mm (Optional);
- No-load Speed: 6.4N(150mm/s), 19.2N(50mm/s), 32N(30mm/s), 64N(15mm/s) , 96N(9mm/s) , 188N(5mm/s) (Optional);
- Low noise: The low noise design, noise level below 50dB;
- Operating frequency: 10%;
- Material: aluminum alloy housing;
- Degree of protection: IP54, protection against dust, water and corrosion, suitable for outdoor use. Internal limit switch, switch off automatically when it reaches in the case of motoridling.
Stroke = 10mm
Minimum installation distance (the distance between the centers of the two installation holes after fully retracted): Stroke + 54.5mm = 10+54.5=64.5mm
Fully retracted length:73.5mm
Maximum length (the maximum length after being fully pushed out): Stroke*2 + 63.5mm = 10*2+63.5=83.5mm
Stroke = 21mm
Minimum installation distance (the distance between the centers of the two installation holes after fully retracted): Stroke + 54.5mm = 21+54.5=75.5mm
Fully retracted length:84.5mm
Maximum length (the maximum length after being fully pushed out): Stroke*2 + 63.5mm = 21*2+63.5=105.5mm
Stroke = 30mm
Minimum installation distance (the distance between the centers of the two installation holes after fully retracted): Stroke +54.5mm = 30+54.5=83.5mm
Fully retracted length:93.5mm
Maximum length (the maximum length after being fully pushed out): Stroke*2 + 63.5mm = 30*2+63.5=123.5mm
Stroke = 50mm
Minimum installation distance (the distance between the centers of the two installation holes after fully retracted): Stroke + 54.5mm = 50+54.5=104.5mm
Fully retracted length:113.5mm
Maximum length (Maximum length after fully pushed out): Stroke*2 + 63.5mm = 50*2+63.5=163.5mm
Stroke = 75mm
Minimum installation distance (the distance between the centers of the two installation holes after fully retracted): Stroke + 54.5mm = 75+54.5=129.5mm
Fully retracted length:138.5mm
Maximum length (Maximum length after fully pushed out): Stroke*2 + 63.5mm = 75*2+63.5=213.5mm
Stroke = 100mm
Minimum installation distance (the distance between the centers of the two installation holes after fully retracted): Stroke + 54.5mm = 100+54.5=154.5mm
Fully retracted length:163.5mm
Maximum length (the maximum length after fully pushed out): Stroke*2 + 63.5mm = 100*2+63.5=263.5mm
Package included:
1* mini linear actuator
2*Mounting brackets