Removes 4mm of Shifter Slop. You only need one unit of these. So, you have a Mk4 or early Mk5 and you want to tighten up your side to side shifter throw. Get rid of the annoying slack when you move the shifter side to side in gear. well, now you can with our Perfect Pivot cable end inserts! As compared to metal inserts these are better since they are made with Delrin and provide very low friction shifting. Also, they are made with a .001" clearance to the 10mm pin they mount to so they offer the ultimate in precision. 100% of the energy you put into guiding the shifter into gear goes to doing just that with nothing wasted. Precision is your friend. Get it now!
This kit replaces the spongy rubber insert in cable end 1J0 711 761C used from 2001-2006. This is for a pair of round bushings and does not include a cable end. You will reuse your own cable end to use these parts. Includes one pair (2) of Delrin Perfect Pivot bushings for one cable end only. Can be used on cable ends 1J0 711 761B or 5N0 711 761 will fit on the plastic 10mm pins from 2007 and newer cars.