Description:
A ready to use, solvent‐free industrial grade PVA timber adhesive which is suitable for use in damp and humid
conditions, inside and out, and gives a high strength, water, impact and temperature resistant bond that is
usually stronger than the wood itself.Benefits:
w Excellent water resistance, suitable for water immersion.
w Fast setting.
w Short press time.
w It is possible to process wood species like pine or
spruce with pressing times of minimum 12 minutes.
w Improved adhesion on difficult wood species (eg. oak, larch).
w Low timber staining characteristics; no discolouration of
the glue line due to the influence of process heat (eg.
HF‐press).
w Improved heat and water resistance when using high
process temperatures (eg. 70°C).
Provides the user with a waterproof D4 grade wood adhesive with
none of the safety issues associated with conventional isocyanate
containing (polyurethane) D4 grades.
Uses
This is a universal system and is applicable for furniture
production, parquet flooring, window frames, window scantling,
door manufacturing and solid wood bonding.
As a general woodworking/ joinery adhesive. General assembly
line work. Radio Frequency/ HF cure systems, wood on wood
laminating, and household DIY use.
Preparation
Surfaces to be bonded must be clean, dry and free from dust,
grease or contaminants that may hinder adhesion. Mis-machined
parts may require longer setting times and could produce a
weaker bond. Note: drying time is extended at low temperatures
and high humidity.
Application
Apply this adhesive thinly and evenly to one side or, if a high
degree of water resistance is required, to both sides, using a
spreading machine, glue roller, serrated trowel, glue brush and
another suitable device. Do not over apply as this will slow down
cure. Clamp surfaces together until adhesive dries. (off in <1 hour:
full strength 8 hours). Support until fully cured (8 hours at 20°C).
Ensure product is fully dried before water exposure (approx. 1
week). When fitting dowels, the adhesive should be applied to the
holes. Best results will be achieved when room, material and
adhesive temperature is between 18 - 20o
C.
Minimum Pressing Times
- Assembly gluing: 8 - 15 min.
- Short cycle press at +70°C: approx. 60 sec.
- Boards and block gluing: 15 - 30 min.
- Window scantlings, depending on type of wood:
▪ Softwood (eg. spruce): from 15 min.
▪ Hardwood (eg. oak, beech): approx. 2 hours.
Limitations
▪ Ensure wood doesn’t contain excessive moisture (<10%)
▪ Not suitable for load bearing applications.
▪ Do not use at temperatures below 10°C.
▪ Clean excess adhesive off glue line after clamping before
adhesive dries with a damp cloth.
▪ Before staining any wood sand off any excess adhesive.
▪ Ensure sufficient clamping pressure, especially important with
radio frequency bonding.
▪ Use on Laminates: Only suitable for bonding small
porous laminate strips. Do not use on non-porous or
large areas of laminate. Use CONTACT ADHESIVE.
▪ Because of the varied nature of wood components,
e.g. area of growth, type of pre-treatment etc,
unpredictable discolouration may occur on different
types of wood such as cherry, beech and others. In
certain oaks, iron and tannin can also give this effect.
We recommend you test compatibility before carrying out
large scale manufacture.
Coverage
Surface bonding 70-150g/m2 (1L will cover 6m2
-14m2
).
Assembly bonding 150-180g/m2 (1L will cover 6m2
-7m2
).
Container Size
1L plastic bottle.
Never compromise on quality!
Description:
A ready to use, solvent‐free industrial grade PVA timber adhesive which is suitable for use in damp and humid
conditions, inside and out, and gives a high strength, water, impact and temperature resistant bond that is
usually stronger than the wood itself.
Premium Water Resistant D4 Wood Adhesive
GLUES & ADHESIVES RANGE
D4 WOOD GLUE
V3 01/02/22
Supercedes: V2 20/07/20
BOND IT
Head Office: Unit G16 River Bank Way, Lowfields Business Park,
Elland, West Yorkshire HX5 9DN.
Telephone: +44 (0)1422 315300 Fax +44 (0)1422 315310
Email: salesuk@bonditgroup.com Website: www.bonditgroup.com
The data presented in this
leaflet are in accordance with
the present state of our
knowledge, but do not absolve
the user from carefully
checking all supplies
immediately on receipt. We
reserve the right to alter
product constants within the
scope of technical progress or
new developments. The
recommendations made in this
leaflet should be checked by
preliminary trials because of
conditions during processing
over which we have no
control, especially where other
companies raw materials are
also being used. The
recommendations do not
absolve the user from the
obligation of investigating the
possibility of infringement of
third parties rights and, if
necessary clarifying the
position.
Recommendations for use do
not constitute a warranty,
either expressed or implied, of
the fitness or suitability of the
products for a particular
purpose.
Specification Summary
Chemical Composition PVA dispersion
Colour Off white (dries clear)
pH 3.5
Open Time @ 150g/m2 Approx. 10 mins
Chalk Point Approx. 8o
C
Press pressure for stress free workpieces 0.1 - 0.5 N/mm2
Viscosity @ 20o
C Brookfield HB spindle 2 20 rpm Approx. 5,500 mPas
Density ca. 1.07g/cm3
Solid Content ca. 45%
Solubility in Water Miscible
Product Details:
Part of the Bond It Glues & Adhesives Range
Colour
Off-white liquid.
Shelf Life
9 months from date of manufacture when stored in unopened
bottles.
Storage Conditions
Store in well sealed containers to avoid evaporation of water and
the formation of skin on the surface of the product. The emulsion
must be stored at a temperature between 15-23o
C. Do not allow to
freeze. Higher temperatures will affect quality and cause the
formation of crusts and skins, especially if the containers are not
tightly closed or subjected to direct sunlight for long periods.
Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Replace lids and remove any
containers to a central disposal point in accordance with local
regulations.
Any spilt material should be mopped

 

Package Content: