Features:

1. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP.
2. (1)cost effective turbocharger give your car 20-25% more total power  
(2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius 
(3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius
(4) Cast aluminium blades with good gas tightness and corrosion resistance
3. This Turbocharger you will receive has been balanced using the VSR machine technology.
Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely

Installation Notice:

We highly recommend you make sure the points below before installing:
1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. 
2.Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. 
3.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. 
Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.