Application

It is suitable for bedrooms, living rooms, offices, coffee shops, restaurants, etc. It has an irradiated area of 32.29-53.82 square feet.

Specification    

Color: Black

Style: New China Style

Shape: Round

Material: Metal, PMMA, Glass, Fine Sands

Placement Position: Desktop

Special Feature: Adjustable

Light Source: LED

EU Energy Label Efficiency Labeling Class: A++to E

Efficiency: E

Light Color: White Light, Warm Light, Natural Light

Applicable Scenes: Living Room, Bedroom, Dining Room, Office

Plug Type: US

Working Voltage: 110V, 60Hz 

Irradiated Space: 3-5m²/ 32.29-53.82ft²

Package Size: 32*16*32cm/12.6*6.3*12.6in

Product Size: 25*15*27.5cm/9.84*5.91*10.83in

Inner Frame Diameter: 16cm/ 6.2in

Base Size: 15*15*2.5cm/ 5.91*5.91*0.98in

Gross Weight: 1.5kg/3.33lbs

Air Control Operation

1. When the quicksand falls too slowly, pump out some air.

Specific operation: Focus the air bubbles on the hole (need to determine the sand has moved away) and then use the air regulator (syringe) inserted into the air hole to draw out the air. 

2. When the quicksand falls too fast, inject some air.

Specific operation: Concentrate the air bubbles in the hole (make sure the sand has moved away) and then insert the air regulator (syringe) into the air hole to inject air.

3. If many small bubbles in the item become a particularly large bubble, there are two solutions: Mote the sand painting, so that the large bubble shakes loose into small bubbles; you can add a little water in moderation to supplement the evaporation of water.

Package Included

1*Moving Sand Art Picture with LED Light

1*Syringe

1*English Manual

Notes

1. Please note that without the need to adjust the goods after receiving, just flip them back and forth a few times.

2. As the temperature and air pressure change, sometimes you need to use the air injector in the package to adjust the air and water in the sand painting.

3. Please note that the height of the air layer varies depending on the size of the product. The amplitude height of about 0.2cm to 0.79inch between the sand will have a better flow rate.

4. Notes on water injection: Be sure to use pure water or boiled water for cooling. Pump out some air and empty the air regulator. Use an air injector to inject the right amount of water to prevent excessive pressure and broken glass (too much air will lead to excessive pressure inside the quicksand painting, which will lead to broken glass, keep in mind!)

5. It is recommended to be patient and flip a few more times to slowly master the method to experience the fun of sand painting and the picture you want.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.