2Pcs 2000W Spray Baking Booth Infrared Paint Curing Light Heating Lamp Heaters

2PCS Paint Curing Lamps, Red Dual-tube Paint Curing Lamp, Paint Curing Lamp

Specifications
Color: Red
Style: Modern
Material: Galvanized Board, Iron
Process: High-temperature Spraying Process
Heating Tube Type: Carbon Fiber
Assembly Required: Yes
Voltage: 110V, 50Hz
Heating Area: About 1m³/35.3ft³
Total Power: 2000W
Each Heating Tube Power: 1000W
Heating Temperature: About 200℃/392℉
Product Size: 62*18*5cm/24.4*7*1.97inch

 

Package Included
2* Paint Curing Lamps
4* Brackets
Other Needed Accessories

Details

The Product Can Be Adjusted up and down by 45° to Allow for More Flexibility in the Direction of Heat Transfer
Stable Brackets and Screws Hold the Lamp in a Fixed Position, Reducing Unexpected Movement During Regular Use. the Simple Structure and Accessories We Provided Make the Installation Easier and More Time-savingThe Design Includes Multiple Openings for Rapid Heat Dispersion, Maintaining Stable Temperature During Use

Application
This paint curing lamp is suitable for automotive paint booths, local paint drying, putty drying, heaters, printing dryers, and different kinds of drying equipment, etc. Equipped with energy-efficient carbon fiber heating tubes, the unit delivers high heat utilization, supports better paint baking effects, lowers the occurrence of wrinkles and breaks, and helps reduce repeated work.

 

How to Install:
1.Install the two lamps and hold their ends with 2 clips.
2.Place the net into the housing. (Please be careful not to cut your hands.)
3.Fasten the two brackets to the ends of the housing with screws.
4.Connect the wires at each end of the lamp (right to right, left to left) and connect them to a neutral energized conductor (make sure the fire wire is on one end while the zero wire is on the other).

 

Key Features
Build to Last: The galvanized board with high-temperature spraying plastics treatment provides this product with high hardness, resistance to corrosion and rust, and long service life.

 

Thoughtful Design: The brackets, designed with pre‑set holes, bring convenience and firmness to the installation process. The iron wire net stops large foreign bodies from entering and preserves the heating tubes in good condition.

 

Rapid Thermal Performance: Each lamp includes a pair of 1000W carbon fiber heating tubes that generate fast and steady heat, reaching near 392℉ in little time and extending over an area of around 35.3ft³.

 

 

Notes
1.Please check the size carefully before ordering.
2.Please do not touch its surface and iron wire during heating to avoid burns.
3.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

 

PushAuction


On Jun 16, 2026 at 19:10:50 PDT, seller added the following information:

Datacaciques