Higher output power for more demanding headphones
The M0 Pura delivers output power comparable to that of the M0 Pro (236mW), although slightly higher at 250mW.
Compared to the M0S, which provides only 60mW, the new model offers more than four times the output power.
The primary reason for the substantial power difference between the M0 Pura and the M0S is the inclusion of balanced
output support. However, similarly to the M0 Pro, the M0 Pura features a 3.5 mm headphone output that requires
a 3.5 mm-to-4.4 mm adapter to unlock its maximum output power.
Power consumption has increased
Power consumption on the M0 Pura is higher. Unfortunately, this DAP is capable of providing only 9 hours and 30 minutes
of continuous playback. For comparison, the M0 Pro and M0S models deliver battery life ranging between 13 and 15 hours.
Connectivity remains unchanged
Both USB DAC mode and bidirectional Bluetooth connectivity remain available on the M0 Pura.
In other words, users can utilize the DAP as a DAC/amp by connecting it to a PC, while also pairing it via Bluetooth
with both headphones and smartphones. It is also possible to use the device solely as a music transport by
connecting a USB Dongle DAC to the DAP.
Bluetooth codec support also remains unchanged. For headphone connectivity, the supported codecs are
SBC, AAC, aptX, and LDAC. When connecting the M0 Pura to a smartphone, the supported codecs are SBC,
AAC, and LDAC.
specifications
• Bidirectional Bluetooth 5.0 (signal transmission and reception)
• Bidirectional USB-C port (signal input and output)
• DAC: dual Cirrus Logic CS43131
• Display: 1.54-inch HD (720p) touchscreen
• Headphone output: 3.5 mm with balanced output support (via adapter)
• microSD card support: supports cards up to 2TB
• Operating system (OS): MTouch OS
• USB DAC mode support
• Weight: 35.8g
Battery specifications
• Battery capacity: 650mAh
• Battery life: 9.5 hours
Bluetooth audio specifications
• Supported Bluetooth codecs for signal reception: SBC, AAC, and LDAC
• Supported Bluetooth codecs for signal transmission: SBC, AAC, aptX, and LDAC
Wired audio specifications
• Dynamic range: 121 dB
• Native decoding: PCM 32-bit/384kHz and DSD128
• Output impedance: < 0.8 Ohm
• Output power: 250mW at 32 Ohms using the 3.5 mm-to-4.4 mm adapter
• Signal-to-noise ratio: 121 dB
• THD+N: 0.0004%