Application
With a lighting area of 107.64-215ft², it is ideal for the living room, dining room, hotel, club, restaurant, kitchen, study, bedroom, meeting room, etc.
Specification
Color: Bronze
Style: Modern
Shape: Round
Material: Iron, Crystal, and ABS
Process: Baking Paint
Mount Type: Ceiling Mount
Installation Required: Yes
Efficiency: E
Light Source: LED (Included)
Light Color: White, Neutral, Warm
Color Temperature: 3000-4500-6000K
Speed Gears: 6
Timing: 1/2/4H
Lighting Area: 10-20㎡/107.64-215ft²
Motor Power: About 35W
Light Power: 36W
Noise: About 30dB
Battery Type: 2*AAA Batteries(Included)
Remote Control Distance: Within 5m/16.4ft
Control Method: Remote
Voltage: 100-220V
Number of Fan Blades: 4
Base Diameter: 15cm/5.9in
Overall Product Size(D*H): 107*60cm/42*23.62in
Short Rod Length: 10cm/3.93in
Long Rod Length: 25cm/9.84in
Package Size: 55*55*39cm/21.65*21.65*15.35in
Gross Weight: 13kg/28.66lbs
Net Weight: 12kg/26.46lbs
Package Included
1x Ceiling Fan Light
1x Remote Control
Notes
- It is for the ceiling installation requirements: floor height ≥ 8.53ft; ceiling load ≥ 66.14 lbs, wood plate thickness≥ 1.18 inches. To ensure wind power and safety, the distance between the fan blades and the wall should not be greater than 23.62in, the distance to the ceiling should not be less than 7.87in, and the distance to the ground should not be less than 7.55ft.
- Ceiling installation is recommended for flat ceilings. If there are recessed round and square designed ceilings, please calculate the installation height in conjunction with the surface of the ceiling so as not to cause the ceiling fan to be installed without wind.
- Generally, it can be installed on inclined surfaces, but the angle of inclination cannot be greater than 30°, so customized hooks (not included) are required to adjust the installation angle.
- When installing or wiring, please turn off the electric switch and test if the light is on. When chiseling or drilling in the wall, please do not damage the wire and other hidden facilities. We strongly recommend experienced and qualified personnel to install the product.
- Please do not use any obstacles to block the rotation of the fan blades. Please do not install any external solid-state circuits or speed regulators in this ceiling fan system.
- Please do not bend the blades when calibrating and cleaning the fan.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
