Information:
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
Note: Without mounting bracket, some models may need mounting bracket!
7" Inch Round Diamond Crystal Clear Glass Lens / Headlight Conversion Kit contains everything you need to upgrade your headlights to the newest headlight technology while keeping that classic look!
-Made with High Quality Glass Lenses - NOT cheap plastic!
-Housing has Removable bulb sockets for you to install the new bulbs!
-Direct Plug & Play design (certain vehicles will require slight modification)
-Professional Installation is highly recommended
-Warranty 5 years
Pair (2 Bulbs Right And Left) 7" Inch Diamond Crystal Clear Semi Sealed Beam Glass Lens Housing Headlights. This Pair Of Headlights Includes 50W Super White H4 Light Bulbs. These Headlights Have A Clean Custom Look But Fit Into The Stock Buckets And Plug Into The Stock Wiring Without Modification.
These Light Up 500 Percent Brighter And Whiter Than The Standard Stock Sealed Beam Incandescent Headlight Bulbs. These Have The Original 3 Prong Plug Design On The Back So They Will Plug Directly Into The Original Wiring Harness. These Will Fit Any Car Or Truck That Has 2 Round Glass Headlights That Are 7" Inches.
H4 Bulbs Specifications
-Color: 6500K Cool White
-Power Consumption: 50 Watt /Bulb
-Luminosity: 10,000 LM /Bulb
-Operating Temperature: -40 - +150°C
-360 Degree / L2 Series CSP Chip Perfect Beam Angle
-H4 - Dual Beam Function (You will have HIGH AND LOW!)
-500% Brighter than Stock Halogen
-Built in IC Circuit (Current Regulator)-Prevents Damage From Voltage Variations & Spikes.
-Lifespan: 50,000 Hours
-Operating Voltage: DC 12V / 24V
-Amperage: 1.9A - 2.9A
-Maintenance free, Waterproof IP67, Shockproof
-Warranty 5 years
Contents:
- 2x Headlight Housings
- 2x H4 Bulbs (Hi/Lo Dual Beam)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.