Little Devil Compact Manual Plate Bender – Manual Plate Bending, Rolling, and Edging Machine

Model: RB320

Dimensions: L 470 x W 120 x H 225 mm

Packaging Dimensions: 500 x 240 x 200 mm

Net Weight: 9.8 kg

Gross Weight: 11 kg

Roller Dimensions: Diameter 30 mm, Length approx. 320 mm

Material: 45# steel, heat-treated

Hardness: 60

Processing Capabilities: Depends on dimensions and material. For example, when processing galvanized sheet metal, the maximum sheet thickness must not exceed 2.5mm;

The maximum wire diameter for iron wire processing must not exceed 6mm, and for steel wire processing must not exceed 5mm;

Processing width: 300mm, sheet thickness must not exceed 1mm;

For a processing width of 150mm, the sheet thickness must not exceed 1.5mm;

For a processing width of 75mm, the sheet thickness must not exceed 2mm;

For a processing width of 50mm, the sheet thickness must not exceed 2.5mm;

Rolling dimensions: The minimum rolling diameter for sheets must not be less than 35mm; there is no upper limit on the maximum rolling diameter.

Applications: Used for various types of sheet metal, such as steel sheets, aluminum sheets, copper sheets, and galvanized sheets;

(Note: Stainless steel sheets must not exceed 0.8 mm in thickness) for processes such as rolling into circles, etc.