IMPORTANT NOTICE – PLEASE READ BEFORE PURCHASING
PRODUCT DISCLAIMER
This product is a DIY Resin Miniature Model Kit and is supplied as unassembled, unpainted resin parts.
- This is NOT an official licensed product.
- This is a fan-made resin reproduction kit intended for hobby and collection purposes.
- Product photos may show assembled and painted examples for display purposes only.
- The actual item received will require cleaning, preparation, assembly, and painting.
- Basic modeling skills and hobby experience are strongly recommended.
- If you are expecting a ready-to-display product or factory-finished parts, please do not purchase.
- By purchasing this item, you acknowledge and accept the characteristics of resin model kits described below.
ABOUT RESIN MODEL KITS
Resin miniature kits are different from standard plastic model kits and usually require additional preparation before assembly.
Due to the nature of resin casting and small-batch production, parts may contain:
- Mold lines
- Flash and excess resin
- Support marks
- Minor air bubbles
- Small surface imperfections
- Slight warping
- Casting marks
These are normal characteristics of resin miniatures and are not considered manufacturing defects.
Some parts may require:
- Trimming
- Sanding
- Filling
- Drilling
- Pinning
- Heat adjustment using warm water
Experienced hobbyists will be familiar with these preparation processes.
PACKAGE CONTENTS
Included:
- Unassembled resin model parts
- Base and accessories (if applicable)
Not Included:
- Glue
- Mold line scraper
- Hobby knife
- Sandpaper
- Paints
- Brushes
- Assembly tools
All tools and finishing materials must be supplied by the buyer.
BEFORE ASSEMBLY
Before beginning assembly, all resin parts should be properly cleaned and prepared.
We recommend the following tools:
- Hobby knife
- Mold line scraper
- Sandpaper
- Model glue
- Putty/Filler (optional)
- Primer and paints
Proper preparation will greatly improve the final appearance and fit of the model.
RECOMMENDED BUILDING PROCESS
Step 1: Inspect all parts.
Step 2: Remove flash, casting gates, and support residue.
Step 3: Wash all resin parts thoroughly using warm water and mild soap.
Step 4: Remove mold lines and clean part surfaces.
Step 5: Repair minor imperfections if necessary.
Step 6: Sand contact points and visible surfaces.
Step 7: Assemble using suitable model adhesive.
Step 8: Prime and paint according to your preferred finishing method.
PAINTING & FINISHING
This product is supplied in raw resin form.
Painting, weathering, basing, and other finishing techniques shown in product photos are for demonstration purposes only and are not included.
Final results will depend on the builder's skill and finishing methods.
SAFETY INFORMATION
- Resin dust may be harmful if inhaled. Please wear suitable protection when sanding.
- Work in a well-ventilated area.
- Resin parts may be fragile and should be handled carefully.
- Contains small parts. Not suitable for children.
INSTRUCTIONS
If assembly instructions are available for this kit and you have not received them, please contact us.
PDF instructions may be provided upon request. Please include your email address when contacting us.
