Fit for:
Land Rover Freelander 2 [L359] (2006-2014)
Land Rover Discovery 3 [LR3] (2004-2009)
Land Rover Discovery 4 [L319] (2009-2012)
Land Rover Range Rover Sport [L320] (2005-2013)
Specifications:
Product Material: ABS
Colour: Black
Image Sensor: 1/3" Colour CCD
Effective Pixels: 756 × 720
TV System: NTSC / PAL
Resolution: 500 TV Lines
Lens Angle: 170° Wide Angle
Operating Voltage: 12V DC
Operating Temperature: -20°C to +80°C (RH95% Max)
Signal-to-Noise (S/N) Ratio: More than 48dB
Automatic Adjustments: Auto AGC (Gain Control), Auto BLC (Backlight Compensation), Auto White Balance
Waterproof Rating: IP69
Placement on Vehicle: Number Plate, Rear
Packaging Weight: 200 g
Packaging Dimensions (cm): 15.5 x 11 x 5
Features:
*Premium Colour CCD Sensor
Equipped with a 1/3" colour CCD image sensor. Ensures reliable light sensitivity and clear visibility, helping you see behind your vehicle even in low-light conditions.
*IP69 Waterproof Protection
Durable black plastic housing with a certified IP69 rating for water and dust resistance, built to withstand heavy rain, car washes, and wet outdoor conditions.
*Precision Fitment
Suitable for selected Land Rover Freelander 2, Discovery 3/4, and Range Rover Sport models as listed. Check the compatibility list for full vehicle fitment.
*170° Wide Angle View
Features a wide 170-degree viewing angle to significantly reduce rear blind spots, making your SUV's parking and reversing in tight spaces much easier.
*Reversing Camera Solution
An ideal replacement for a damaged factory number plate housing or a failed aftermarket camera. Also perfectly suitable as a retrofit addition for vehicles without a factory-installed camera system.
Important Buyer Information:
1. Aftermarket Component: This is a high-quality aftermarket part, not an OEM factory component. Professional installation is highly recommended as wiring and routing are required.
2. Operating Voltage: DC 12V system standard.
3. Interface Required: A compatible interface adapter is required for installation with factory-fitted original monitors or factory head units.
How to Install (For Reference Only):
1. Remove the Factory Light: Carefully remove your stock licence plate light assembly at the rear of the vehicle.
2. Mount the Camera: Secure the camera in the position where the stock licence plate light was previously located.
3. Connect Power to Reversing Lights: Connect the camera's power cables to your vehicle's reversing lights: link the red wire to the positive terminal and the black wire to the negative terminal.
4. Route the Video Cable: Connect the camera's video cable to the extension cable provided.
5. Connect to the Monitor: Route the extension cable through the vehicle and connect it to your car monitor or head unit.
6. Test the System: Engage reverse gear to test the system; the live rear-view image should automatically display on your screen.
Package Includes:
1x Reverse Camera Kit (as pictured)
