The raincoat (raincoat) poncho with anti-thermal imaging device is manufactured with the modern needs of our military in mind. The front and back parts of the raincoat are made of raincoat fabric, stitched in the middle with a special laminate (aluminum mesh), reinforced with reinforcement. The interior is lined with a breathable membrane for increased comfort. The size of the poncho with hood when unfolded is 150 x 300 cm, and the raincoat is 150 cm long. For convenience, there are special handholes on the sides and in the middle. The side openings are secured with Velcro. Advantages: • A raincoat as protection from thermal imaging, it is not penetrated by thermal imaging at a working distance (we conducted tests with a thermal imaging range) • Ideal for covering from thermal imaging at a distance of 100 meters (in winter at lower temperatures it works from a distance of 30 meters, but in summer it is better to use it no closer than 100 meters) • Fits loosely on the body, so it does not heat up quickly on a warm night (this is achieved by sewing in three loosely connected layers, the construction of the poncho itself also works, ensuring the movement of air) against rain, does not let in wind and moisture • Tear-resistant due to the reinforcement of the laminate layer, unlike ordinary film, which is damaged under almost any load • Takes up little space when folded, comes with a cover for storage and transportation.