PDX-2300 mkii is very rare to find on the market.

Coming with a stylus light. (headshell and cartridge not included!!), working condition with some scratches, wears, and paint coming off from regular use.

the picture of the headshell and the cartridge is only to show the arm balancing well, but not included in this sale.

Sustainer screw has some rust.

It comes with a special red mini fader nob made by 3D printer!

Please check the pictures carefully for the appearance.

Pitch controls, speed adjust, and reverse functions work fine.

RCA and earth cables are included.

Make sure to connect an earth cable to the unit and the main controller.

Power cable - AC100V Japan type

Make sure to use trnsformer if your country power supply voltage is different.

Return acceptable if you pay the shipping cost.

Detail Conditions

1. The tonearm can be balanced correctly with the counterweight installed. Difficult to tell but please see the picture for balanced arm with my headshell and cartridge (not included for this sale). I tested the turntable with a record and playback was normal. There is no skipping or other abnormal behavior during playback.

I also checked the tracking force adjustment. When the tracking force dial is increased from 0g to approximately 3g, the tonearm shows a noticeably stronger downward force, indicating that the spring mechanism is functioning properly.

2. The platter spins normally. There is a very slight vertical movement (approximately 0.5 mm), which is typical for a used turntable and does not affect playback or speed stability.

3. Checked the pitch with a RPM checker app, confirmed 33.3 and 44.96 RPM. +/- 10 and 50% pitch controller is also checked. 10cm pitch control fader is cleaned and maintained, very smooth.

It comes with a RPM report measured by my original app.

4. For Ultra pitch, confirmed both +/- 50% RPM change.