FS4 Fireshield AC Intumescent Acoustic Acrylic Sealant And Adhesive - EU3 White

 
Description:
A high performance, flexible acrylic building sealant and adhesive which, in the event of fire, will swell to provide
a smoke resistant barrier. Up to 4 hour fire rating achievable.
A solvent-free, ready to use sealant, tested to the following

specifications:
BS EN1366 - 3:2009 achieving 4 hours integrity and 2 hours
insulation for a range of penetration seals & BS EN1366 - 4:2006
achieving 4 hour
integrity and insulation rating for a range of linear joints.
BS EN ISO 10140-2:2010. Measurement of Airborne Sound
Insulation of Building elements. The sealant maintained the
integrity of a plasterboard partition wall with a Sound Reduction
Index of 55dB.

Uses
FIRESHIELD AC is specially manufactured to form an acoustic and
fire rated intumescent barrier in construction applications.
When subjected to heat Bond It FIRESHIELD AC swells (intumesces)
to provide an inert barrier to smoke and flame.
The fire resistance achievable with Bond It FIRESHIELD AC depends
upon the joint design, depth of sealant and substrates being
sealed. Details of fre testing are available on request.
It is non-slumping and rapid skinning. It can also be overpainted
within 1 hour.

Application
All surfaces to be sealed must be clean, dry and free from grease,
laitence or dust that may hinder adhesion.
When applying the sealant, ensure all crevices are filled and there
is complete contact between sealant and substrate. Tool down
using a wetted spatula. Any excess may be removed using soapy
water before FIRESHIELD AC dries. Do not apply in damp conditions.

Limitations
FIRESHIELD AC is not suitable in joints where movement exceeds +
or - 12.5% of joint width, or in external joints

Container Size
EU3 cartridges and 600ml foil sausages (white only).

Shelf Life
12 months from date of manufacture if stored in original
unopened cartridge.

Storage Conditions
Store in cool dry conditions between 5-15o
C Protect from frost.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any containers to a
central disposal point in accordance with local regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

Specification Summary
Appearance Viscous paste, hardening by evaporation of
water to a plastic/ elastic solid
Flammability Non-flammable
Tack Free Time 15 mins - 1 hour dependent on ambient conditions
Specific Gravity 1.60 - 1.66
Application Temperature 5-40oC
Service Temperature -20 to +70oC
Solubility (water) Miscible when uncured
Slump Resistance <3mm

Product Details:
Colour: White
Size: EU3

Package Content
1x FS4 Fireshield AC Intumescent Acoustic Acrylic Sealant And Adhesive EU3 - White