| Number of digital outputs | 2 |
| Number of Channels | 2 |
| Signal type | Digital |
| Signal type (voltage) | 0 … 230 VAC/DC |
| Making capacity (current/time) | 0.5 A (20 s) |
| Making capacity (current/time) (2) | 1.5 A (0.1 s) |
| Actuator connection | 2 x (2-wire, 3-wire) |
| Output circuit design | Solid-state load relays |
| Output characteristic | non-floating |
| Output current per channel | 0.3A |
| Load type | Resistive, inductive |
| Pull-in time (max.) | 10ms |
| Pull-in time (typ.) | 4ms |
| Drop-out time (max.) | 3ms |
| Drop-out time (typ.) | 0.1ms |
| Contact resistance (max.) | 3.2Ω |
| Contact resistance (typ.) | 2.1Ω |
| Switching frequency (max.) | 5 Hz; 24 V; 0.3 A; DF = 50 % |
| Switching frequency (max.) (2) | 0.5 Hz; 230 V; 0.3 A; DF = 50 % |
| Protection against incorrect wiring | Overvoltage protection (275 V) via varistor |
| Output data width (internal) max. | 2Bit |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (system supply) | 10mA |
| Supply voltage (field) | 250 VAC/DC; via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact) |
| Isolation | 1500 V (system/field) |
| Indicators | LED (A, C) green: Status DO 1, DO 2 |
| Number of incoming power jumper contacts | 3 |
| Number of outgoing power jumper contacts | 3 |
| Current carrying capacity (power jumper contacts) | 10A |