Special Note:

• The real thickness of spacer is 1.73"/ 44mm.
• Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.

Fits;

• 1994-2018 DODGE RAM 1500 2WD
• 1994-2018 DODGE RAM 2500 2WD
• 1994-2018 DODGE RAM 3500 2WD

Note;Please check your vehicle compatibility before buying

DOES NOT FIT MEGA CAB MODELS / DOES NOT FIT EXTENDED CAB MODELS

*NOT COMPATIBLE WITH 2013+ RAM TRUCKS EQUIPPED WITH THE ACTIVE-LEVEL FOUR-CORNER AIR SUSPENSION

Description:

Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.

They are CNC machined out of billet aluminum and then powdercoated black to match you factory suspension. The quality of this kit cannot even be compared to welded spacers that crack over time. 

These spacers are the strongest on the market and come with a 100% satisfaction guarantee.

Please note: 

The real thickness of spacer is 1.73"/ 44mm.

Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.

This lift kit will raise the front of your Dodge by a true 2.5 ".

The lift amount and the spacer thickness will NOT be the same, in order to lift your vehicle the advertised height, it is necessary that the spacer is less than the lift amount. The suspension (lower control arm) compounds the amount of lift due to both its length and angle and that is the reason why the spacer needs to smaller than the lift amount.

With an independent suspension, the amount of lift can be significantly greater than the thickness of the lift spacer.