RX8 Front Adjustabl Drift Angle Lock kit

Part No

HA-015

Application

• Mazda RX8

Product details

• 60+ degrees of steering angle, parallel steering, adjustable lock-stopper. You can tune your steering geometry either towards positive or negative Ackermann in just a few minutes even at trackside without messing up an alignment. Ackermann adjustment kit is included.
• Easily adjustable one-piece lower control arm design.
• Lower links are replaced with one arm. When drifting with higher steering angle the stiffness and packaging would become an issue. Therefore lower one-piece control arm is used. Our "double adjuster" allows you to easily and quickly fine tune your setup.
• Higher roll center (RC).
• On Way2tuff knuckle add-on, joints are dropped, which brings the front RC up on lowered car, providing higher roll stiffness and improves drive-ability.
• Very good camber control and minimal bump steer with high steering angle.
• On drift cars the dynamic camber and bump steer is much more important than static. With our kinematics we have assured that the camber would provide very good front grip and bump steer is minimal at all the range of steering.
• Steering jacking control.
• During drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. We have changed the geometry so that it helps to prevent any handling issues.
• Consistent and predictable self-alignment torque.
• Caster is not the only important parameter to provide sufficient self-alignment torque especially at high angle. It’s the combination of different parameters to maintain consistent trail and self-alignment torque. With our setup the steering wheel turns always to the direction of movement and doesn’t get stuck at full lock. 
• 
  
• 
  
• All the metal components on Way2tuff suspension are made of high strength steel, including sheet metal components, tubes, tube ends and rod ends. All the parts are manufactured and assembled in our production facility in China.
• No instruction provided
• professional installation required

Warranty & Return:

All items we sell come with factory warranty

All Warranty claims are back to base at buyers expense

All returns are the buyers responsibility as per eBay policy

All items returned due to incorrect purchase (drunk or otherwise) or change of mind will attract a 15% restock + initial postage fee.

Items must be returned in a BRAND NEW, unused, unopened condition to be eligible for refund.  Otherwise a repacking fee may apply.

Exchanges also attract a 15% restock fee but we are happy to help

If there are any problems with items received, please contact us ASAP with an explanation of the situation and PHOTOS attached via the eBay message system.  We will do our best to remedy the issue.

Please do contact us before leaving feedback.  We are more than happy to resolve any issues.