Precut PPF For Polestar 3 2024-2025 Matte Clear Car Paint Protective Film Scratch Protector Exterior Accessories
❗ IMPORTANT NOTICE ❗
About This Item
Precisely laser-cut using 1:1 original vehicle data for a seamless, gap-free fit—no messy trimming required for a factory-like finish.
Key Features
- Professional-Grade PPF: High-density TPU forms a strong, long-lasting protective layer without changing your car’s original appearance.
- Self-Healing Technology: Minor scratches and swirls automatically repair under sunlight or low heat, keeping the surface smooth and flawless.
- 8.5Mil Heavy-Duty Thickness: Provides superior toughness, high gloss, strong UV resistance, and long-term anti-yellowing performance for up to 6+ years.
- Multiple Finish Options: Default is Gloss Clear. We also offer Matte Clear, Gloss Black, and Matte Black.
Package Includes
- PreCut Full Vehicle PPF Kit (for Polestar 3 2024-2025)
- Installation Scraper
- Spray Bottle
FREE Bonus Gift
Shipping
Installation Instructions
Materials Needed
- Pre-cut PPF kit
- Microfiber towels
- Squeegee / application tool
- Spray bottle with water + a few drops of dish soap (for lubrication)
- Heat gun or hairdryer
- Isopropyl alcohol / automotive surface cleaner
- Clean, lint-free cloths
Preparation
- Clean the VehicleWash the surface thoroughly with car soap and water.Remove all dirt, dust, and contaminants, then dry completely with a microfiber towel.
- Prepare the Installation AreaWipe the installation area with isopropyl alcohol or automotive cleaner to remove oils and residues for strong adhesion.
Application
- Position the Pre-Cut FilmLay out the pieces on a clean, flat surface.Use the kit template to identify each piece and its corresponding location on your vehicle.
- Apply the Film
- Lightly spray the vehicle surface with the soapy water solution to allow repositioning.
- Peel the backing off carefully and place the film onto the surface.
- Align perfectly with the edges of the panel.
- Squeegee the FilmStarting from the center, gently squeegee outward to remove water and air bubbles.Be careful not to stretch or damage the film.
- Heat & ShapeUse a heat gun or hairdryer on low heat to make the film more flexible.Shape it to the vehicle’s curves and contours. Avoid overheating.
- Trim & Final AdjustmentsTrim any excess film along edges for a clean, precise fit.Smooth out remaining bubbles or wrinkles.
- Final CleaningWipe edges and surfaces with a clean microfiber cloth to remove soap residue.
Post-Installation Care
- Curing TimeAllow the film to cure for at least 24 hours without water or harsh conditions.
- No Washing for 48 HoursDo not wash the vehicle for 48 hours to ensure full adhesion.
- Regular MaintenanceClean gently with mild car soap and water.Avoid abrasive cleaners or tools.Check edges periodically to ensure they are secure and clean.
Tips
- Work in a clean, dust-free environment to prevent debris under the film.
- Take your time during alignment and squeegeeing for best results.
- If needed, ask for help from a friend or professional installer.






















