


Product Description
The item of the motor description:
For example, 24V150mm160rpm, the voltage is 24V, stroke 150mm, the speed is 160rpm.
Specification:
Stroke Length:1.18"-6"
Torque:3lbs-30lbs
No Load Speed:30RPM-160RPM
Operation Temperature:-10°C ~ +40°C
Material:Aluminum alloy
Package Including:
(1) 1 x Reciprocating Linear Motor
(2) 1 x Speed Controller
(3) 1 x Remote Controller
(4) 1 x Big End Connector
(5) 2 x Cable
Remote Control Instructions:
The remote control panel and controller are pre-paired. If the remote fails to work properly, you can pair them again by following these steps:
1.Connect the remote and power it on.
2.Press and hold the knob on the panel for 3 seconds until the blue pairing indicator light turns on, then release it.
3.Press any button on the remote within 5 seconds to complete the pairing successfully.
Easy to use:
-Remote control distance up to 328ft in open area.
-Connect the input end of the receiver to the speed controller and the output end to the motor.
-Press the up button,motor speed will increase; Press the down button, motor speed will decrease.Press the pause button, motor will stop.
Note: