Application
It is suitable for indoor weddings, birthday parties, banquets, bars, concerts, dance halls, KTV, clubs, shows, Halloween, Christmas, celebration parties, and other entertainment venues.
Specification
Mount Type: Freestanding
Assembly Required: No
Color: Black
Plug Type: US Standard
Power Source: Corded Electric
Material: Iron, Acrylic, Aluminum
Process: Spray Paint
Voltage: AC 100-240V 50/60Hz
Power Consumption: 800W
Light Source Type: 25 * 30W RGB LED
CRI: Ra>80
Beam Angle: 60°
Strobe: 1 ~ 20 Times/Sec.
Control Modes: Auto/Master/Slave/DMX/Sound
Linear Dimmer: 0-100%
Dimming Refresh Frequency: 4KHZ
Dimming Resolution: 14-Bit
Cooling Method: One Inlet and One Outlet Cooling Cycle & 5 Fans
DMX Data Input/Output: XLR 3-pin
Ambient Temperature: -20~40°C/-4~104°F
Protection Grade: IP20
Best Projection Distance: 4-5m/13.12-16.4ft
Product Size: 58*58*12.5cm/22.83*22.83*4.92in
Package Size: 66*66*24cm/25.98*25.98*9.45in
Gross Weight: 16.9kg/37.26lbs
Net Weight: 16.05kg/35.38lbs
Package Included
1 * LED Stage Light
1 * Power Cord
1* Signal Cable
Notes
- Please check the style and size before purchasing.
- Please note that the light should be mounted away from sources of ignition and water, and should be mounted 19.68 inches from the wall. Before fixing the light, please make sure that the mounting position is stable, and make sure that the light will not fall from the truss.
- The surface temperature of the light can be as high as 140°F even under normal cooling conditions, so do not touch it with your hands.
- The light must be mounted at least 16.4 feet away from any flammable object. The distance between the light and the projecting object must not be less than 13.12 feet.
- The light is designed to be electrocution-proof and must be connected to a well-grounded power system. In addition, the ground wire of the light must be connected to the ground wire of the power system, and the ground wire connection of the light must be well connected to the light body (or the light must be well grounded).
- Please do not use a power cord with a damaged insulation cover, and also, do not place the power cord on any other electrical wires. When the light stops working or is cleaned, please unplug the power cord through the plug, and do not pull it out roughly or handle the cord directly.
- It is prohibited to use the light when the cover is open. Please ensure that the power is turned off before installation, maintenance, and cleaning.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.