GS Tackle XL Low Profile PVA Dropper for Boatman Vulcan V2 Designed & Manufactured here in the UK by ourselves, NEW Extra Large Low Profile PVA Dropper for the Vulcan V2 …… all the great protection and functionality of our normal low profile PVA dropper just on a larger scale !

Simple XL PVA dropper designed to keep your PVA bags off the standard door flaps and away from the water to keep them dry whilst being driven out in the boat.

Unfortunately the Vulcan standard hopper doors can let a small amount of water pass through them during driving, this can melt your bag on the way to your spot and stop you delivering your PVA bag as intended.

We’ve designed this XL Low profile PVA dropper to be a cheap cost effective way of keeping your bags dry from the underneath.
Can be used with a Hopper cover (GS Tackle version) or other manufacturers hopper covers.
This XL Version is 50mm (2”) longer than the original and can support extra long PVA bags, with a maximum length of 145mm (5.7”) x 60mm (2.4”) in diameter (finished bags measured), however if using our Vulcan V2 Hopper cover the maximum diameter is 42mm or the cover will not close.


The PVA Dropper consists of the following parts :

Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.

Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.

Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.

Instructions to use :-

Open the hopper doors, insert the PVA dropper into the hull of the boat at the rear most part.
Close the hopper doors (the flaps will automatically close with the hopper doors)
Open the rear latch of the boat (remove the little black plastic spacer from the slot) Load your PVA bag onto the dropper (ensuring the line is passed within the cutout of the dropper) Replace the black plastic spacer Close the rear latch of the boat

When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !

Manufactured from the highest quality 3D printed filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.

Main body will be black, optional part coloured flaps (made from outdoor grade PETG) please see the colour chart picture and make your selection when ordering.

Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.

Free PVA Scoop / spoon will come with the PVA dropper, random colours supplied however if specific colour required please message us your requirements after placing your order.

PLEASE NOTE : This PVA dropper is designed ONLY for mk2 Vulcan, it will also fit the V1 Vulcan, however the rear tie bar of the hull may reduce the clearance a little at the rear. Does NOT fit VULCAN Mini !

These are manufactured by ourself and made to order hence the 10 day lead time, we will often beat this but occasionally we will be out fishing and testing new products and may need the full 10 days.
If you need the item in a rush, please drop us a message (prior to buying) with your required delivered date and we will reply quickly to confirm if we can get it to you in time.